Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Thread

RE: [Doepfer_a100] Re: Some questions about modular : osc+filters

RE: [Doepfer_a100] Re: Some questions about modular : osc+filters

2002-11-28 by David Salter

The Analogue Solutions SY02 is a very nice filter that contains a -12Db
high pass followed by a -12Db lowpass that can sound similar to an MS20
but because you can over drive the input stage can sound like something
completely different. Certainly worth investigating and a fine
complement to the rest of my A100 modules.
 
Regards

David Salter 
Reuters Consulting 
Tel: +44 20 7542 2402 
Mob: +44 7990562402 
Fax: +44 20 7542 2699 
Show quoted textHide quoted text
	-----Original Message-----
	From: synth_freak_2000 [mailto:synth_freak_2000@yahoo.com] 
	Sent: 28 November 2002 14:28
	To: Doepfer_a100@yahoogroups.com
	Subject: [Doepfer_a100] Re: Some questions about modular :
osc+filters
	
	
	hi skip,
	well,i have the ms20,too and i,too,like it's filters a lot!i
liked 
	them so much that i decided to have 4 such couples of high 
	pass/lowpass filters in my a100.but,i bought the a122/a123
combi's, 
	instead.well, they are 24 db but they sound very good
together(in 
	series,the lowpass after the highpass,just as in the ms20).so,i,

	sure, can tell you that this combi sounds good! but different
from 
	the ms20's filters.the a121,also, sounds good but i haven't
tried two 
	a121's in series to compare them to the ms20.but,anyway,why
would you 
	want to have a great analog modular just to emulate a patchable
mono 
	synth that you aleready have???you can do SO much more with an
analog 
	modular!!!experiment!!!try different filter modules!!!
	about the AS multimode filter,i can't tell you anyhting as i
haven't 
	got it.but it will surelly be good with it's ext.feedback
loop.if you 
	want something like this ,you can go for the excellent a108 
	6/12/24/48db lowpass/bandpass filter!!!!!!!!this will give you
even 
	more creative capabilities!
	and something else:if i were you ,i would buy two a111's!i like
them 
	so much ,for their linear fm feature,that i have 8 of them, in
my 
	a100 system.
	anyway,welcome to the club...
	bakis.
	
	[doepfer_a100] group moderator
	
	
	
	--- In Doepfer_a100@y..., "skip2001fr" <xchambon@w...> wrote:
	> Well, i want to have a modular.
	> I expect one about Doepfer but i have some questions about
filters 
	> and oscillators:
	> 1- My synths are MS20+SQ80. I like very much the comb
HP12db+LP12db
	> But I hesitate with (2x) A121 and Analogue System (2x) RS110
and 
	> Analog Solution SY02 : what do you think about these filters ?
What 
	> the plus and minor of them ?
	> 2- My project is to have one Doepfer's Osc (A111 for Linear FM
and 
	> Soft/Hard Sync) and  one Analogue System (RS95) : What do you 
	think, 
	> by your experience of this combination ? Do any People try
this 
	> solution ?
	> 
	> Thanks for your answers
	
	
	
Yahoo! Groups Sponsor	
ADVERTISEMENT
 
<http://rd.yahoo.com/M=234081.2711418.4084139.1925585/D=egroupweb/S=1705
032144:HM/A=1327985/R=0/*http://ad.doubleclick.net/clk;4870024;7586687;x
?http://www.ameriquestmortgage.com/welcome.html?ad=Yahoo01> 	
 
<http://us.adserver.yahoo.com/l?M=234081.2711418.4084139.1925585/D=egrou
pmail/S=:HM/A=1327985/rand=753523698> 	

	To unsubscribe from this group, send an email to:
	doepfer_a100-unsubscribe@yahoogroups.com
	
	
	
	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> . 
	



-------------------------------------------------------------- --
        Visit our Internet site at http://www.reuters.com

Get closer to the financial markets with Reuters Messaging - for more
information and to register, visit http://www.reuters.com/messaging

Any views expressed in this message are those of  the  individual
sender,  except  where  the sender specifically states them to be
the views of Reuters Ltd.


[Non-text portions of this message have been removed]

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.