Synth-DIY Yahoo! Groups Archives

Thread

volumes on A-111 vary between waveform

2015-08-14 by acgenerator@att.net

Are the Square and Saw\Slope supposed to be louder than the Tri and Sine. Picked up one used and there is a noticeable difference in output to me when testing. (same patch just moving cable from out to out)

if not, any recommendation on adjusting/repairing?

Re: [Doepfer_a100] volumes on A-111 vary between waveform

2015-08-15 by soup

It's perceived as more quiet due to less harmonics. There's nothing wrong.

Take care,

soup

Show quoted textHide quoted text

On Fri, Aug 14, 2015 at 7:03 PM, acgenerator@att.net [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:

Are the Square and Saw\Slope supposed to be louder than the Tri and Sine. Picked up one used and there is a noticeable difference in output to me when testing. (same patch just moving cable from out to out)

if not, any recommendation on adjusting/repairing?

Re: [Doepfer_a100] volumes on A-111 vary between waveform

2015-08-16 by acgenerator@att.net

Thanks - that explanation makes sense to me.

Believe it or not: I have a 40+ modules but this is my first VCO module. I've been using other sound sources (external / speech chip/ noise) with lots of filtering/shaping/processing and letting my stand-alone synths do the standard waveforms.