Yahoo Groups archive
Thread
2016-04-03 by thomas_escure@yahoo.fr
Hello,
As I'm modifying my A-176s more and more, I will have to replace the faceplates.
Is there anybody who I could ask for a template for making my own panel ?
What I need exactly is the placement of the holes for jacks and pots.
Thank you in advance,
Regards,
Thomas
2016-04-04 by Stuart Walker
Hi
Schaeffer AG have ‘Front Panel Designer’. You just design the panel yourself, send the file and a great panel comes back. I have used this a dozen times and it’s great.
Regards
Stu
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
Sent: 03 April 2016 21:43
To: Doepfer_a100@yahoogroups.com
Subject: [Doepfer_a100] Template for A-176 faceplate
Hello,
As I'm modifying my A-176s more and more, I will have to replace the faceplates.
Is there anybody who I could ask for a template for making my own panel ?
What I need exactly is the placement of the holes for jacks and pots.
Thank you in advance,
Regards,
Thomas
2016-04-04 by thomas_escure@yahoo.fr
2016-04-04 by achtung_999
Thank you Stuart for your reply.
I've used Schaeffer services several times too, but what I need is an exact info for the placement of jacks and pots holes. I would not like to make something approximate, as I don't want to stress the solder joints while screwing the electromechanical components to the panel...Regards,Thomas
2016-04-04 by Analog Monster
You could even use a scanner, rescale the image so the dimensions of the panel are consistent with real life (if not already to scale), then trace on a different layer and eventually remove the original image leaving just the trace. Print and compare to real life. I've done this when I've had an old pcb flex and crack and the manufacturer has not existed for decades and it was surprisingly easy.
> On 4 Apr 2016, at 16:56, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: > > ehmmm maybe a stupid remark, but since you have the module yourself: measure maybe? > >> On Mon, Apr 4, 2016 at 1:33 PM, thomas_escure@yahoo.fr [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: >> >> Thank you Stuart for your reply. >> >> >> I've used Schaeffer services several times too, but what I need is an exact info for the placement of jacks and pots holes. I would not like to make something approximate, as I don't want to stress the solder joints while screwing the electromechanical components to the panel... >> >> Regards, >> >> Thomas > >
2016-04-04 by thomas_escure@yahoo.fr
2016-04-05 by yahoo@doepfer.de
Please look at our website: www.doepfer.com > PRODUCTS > Module overview (pictures) > A100_System.cdr Best wishes Dieter Doepfer
> -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Sonntag, 3. April 2016 22:43 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] Template for A-176 faceplate > > > > > > Hello, > > > As I'm modifying my A-176s more and more, I will have to replace the faceplates. > > > Is there anybody who I could ask for a template for making my own panel ? > > > What I need exactly is the placement of the holes for jacks and pots. > > > > Thank you in advance, > Regards, > > > Thomas > > > > > >
2016-04-05 by thomas_escure@yahoo.fr