Doepfer

Just wondering if anybody has run into complications using shorter standoffs with the A-143-4. With my current Monorocket case the depth of the A-143-4 unfortunately allows me only two locations before I bump into the power supply. I notice the original standoffs offer generous space for components; is there any possibility of things malfunctioning if I were to reduce them to just enough to clear the ribbon cables/caps?

I always appreciate the expertise here on the board! Thanks in advance!

-Matt

> Just wondering if anybody has run into complications using shorter standoffs with the A-143-4. With my current Monorocket
> case the depth of the A-143-4 unfortunately allows me only two locations before I bump into the power supply. I notice
> the original standoffs offer generous space for components; is there any possibility of things malfunctioning if I were
> to reduce them to just enough to clear the ribbon cables/caps?
>
>
> I always appreciate the expertise here on the board! Thanks in advance!
>
>
> -Matt

If you make sure that no short circuit is made shorter standoffs may be used. Pay attention to install the jumpers in the desired
positions before you mount the boards as with shorter standoffs you will have no longer access to the jumpers.

Best wishes
Dieter Doepfer