Doepfer

hi list,
as dieter D. told me yesterday,his company is open for new 
suggestions for future modules.so,make some!!even better you can 
create a POLL about these suggestions!!
also,some secrets from the doepfer labs:2 new modules are planned for 
the future:VACTROL filter module and VACTROL phaser modules!!just go 
to the poll section to vote for them!!(PLEASE!!)
synthfreak
athens-greece
[doepfer_a100] group moderator
p.s:MAYBE YOUR DREAM MODULES WILL COME TRUE...

--- In Doepfer_a100@y..., "synth_freak_2000" <synth_freak_2000@y...> 
wrote:
> hi list,
> as dieter D. told me yesterday,his company is open for new 
> suggestions for future modules.so,make some!!even better you can 
> create a POLL about these suggestions!!
> also,some secrets from the doepfer labs:2 new modules are planned 
for 
> the future:VACTROL filter module and VACTROL phaser modules!!just go 
> to the poll section to vote for them!!(PLEASE!!)
> synthfreak
> athens-greece
> [doepfer_a100] group moderator
> p.s:MAYBE YOUR DREAM MODULES WILL COME TRUE...

I'd like to see a Vector Synthesis module, that could be used with the 
joystick module and the morphing controller, to "record" the vector 
like a Korg Wavestation.

I'd like a Doepfer Rear Access module :)
Or maybe a 19" Doepfer mini-jack patchbay (also could include a 
Midi/CV converter to get the Midi cable off the front panel).

I'd like a general-purpose toggle switch/pushbutton module for more 
real-time interaction (like you get with the A155).

I'd like Doepfer to re-package and re-badge the Conrad sillyscope as 
an A100 module.

I'd like a tracking function generator module, like the one in the 
Oberheim Matrix 1000.

Joe

thanks for your ideas! joe...
now,you can create polls about these if you want,or i will create them in a few days(right now i don't have any time...)

 
  buechlerjoe <buechlerjoe@toadmail.com> wrote: --- In Doepfer_a100@y..., "synth_freak_2000" <synth_freak_2000@y...> 
wrote:
> hi list,
> as dieter D. told me yesterday,his company is open for new 
> suggestions for future modules.so,make some!!even better you can 
> create a POLL about these suggestions!!
> also,some secrets from the doepfer labs:2 new modules are planned 
for 
> the future:VACTROL filter module and VACTROL phaser modules!!just go 
> to the poll section to vote for them!!(PLEASE!!)
> synthfreak
> athens-greece
> [doepfer_a100] group moderator
> p.s:MAYBE YOUR DREAM MODULES WILL COME TRUE...

I'd like to see a Vector Synthesis module, that could be used with the 
joystick module and the morphing controller, to "record" the vector 
like a Korg Wavestation.

I'd like a Doepfer Rear Access module :)
Or maybe a 19" Doepfer mini-jack patchbay (also could include a 
Midi/CV converter to get the Midi cable off the front panel).

I'd like a general-purpose toggle switch/pushbutton module for more 
real-time interaction (like you get with the A155).

I'd like Doepfer to re-package and re-badge the Conrad sillyscope as 
an A100 module.

I'd like a tracking function generator module, like the one in the 
Oberheim Matrix 1000.

Joe




Yahoo! Groups Sponsor
To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator


---------------------------------
Do You Yahoo!?
Check out Yahoo! Shopping and Yahoo! Auctionsfor all of your holiday gifts!

[Non-text portions of this message have been removed]

Hi 

> suggestions for future modules.so,make some!!even better you can
I'd like a Phase-Locked-Loop Module. and also a graphic VCO.

The VU-Meter needs function for DC and Audio

I also would like to have non DC-decoupled VCAs

Florian
-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de

Hi Joe 

> I'd like Doepfer to re-package and re-badge the Conrad sillyscope as
> an A100 module.
I think this is trouble for the power supply and also maybe a problem with
Audio interferences

Florian
-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de

Hi Florian

Over on the Doepfer site, Dieter Doepfer said that he had mounted 
one of these in his A100 frame. I assume it didn't cause audio 
interference, because he said he brought it to trade shows that 
way. The only problem was the gap above and alongside the scope in 
the A100 frame, which I assume could be fixed by mounting it in a 
standard-width A100 front plate (maybe with A100-style knobs and 
switches also).

Joe

--- In Doepfer_a100@y..., Florian Anwander <Florian.Anwander@c...> 
wrote:
> Hi Joe 
> 
> > I'd like Doepfer to re-package and re-badge the Conrad sillyscope 
as
> > an A100 module.
> I think this is trouble for the power supply and also maybe a 
problem with
> Audio interferences
> 
> Florian
> -- 
> Florian Anwander                  |ConSol*  HP-Support
> Tel.   +49.89.45841-133           |Consulting&Solutions Software 
GmbH
> Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 
München
> email: florian.anwander@c... |http://www.consol.de

hi list


 <...I assume it didn't cause audio 
interferences...> 

That´s my opinion, too. My scope was atop of my Doe. for a long time and I never had any interferences.
Check http://www.modularsynth.com/emermoog.jpg  That´s Keith Emerson´s huge Moog Modular. Have a look at the upper right, there´s a oscilloscope next to a 904 Low Pass Filter [A-120´s mum ;-)]

Paul





[Non-text portions of this message have been removed]