Doepfer

DOEPFER SAYS:
"we still have some (minor) problems with the A-107
(not with the module generally but with the slew
limiting function). The pure hardware slew limiter is
working now but now the disadvantage is that there is
no display if the module is still morphing to the new
filter or if the new filter is already reached. As
long as the slew function was under software control
the microcontroller "knew" if the slew/morphing had
been finished. So we will try another way: combined
soft/hardware slew limiting, i.e. the software has the
main control over the slew function and the additional
VC hardware slew limiter only irons out the small
steps caused because of the 8 bit resolution of the
DAC that is used for the VCA control. I will keep you
informed about the proceedings.
Consequently I cannot confirm that the A-107 will be
available in August as we still have to find the final
solution for the 100% smooth slew function with
display. As soon as we have tested the combined
soft/hardware slew function I can tell you more.
 
Thanks for the poll results. The SOU result was not
very surprising. But the VC first/last step for the
A-154 was really unexpected as it differs completely
from the suggestions of other A-100 users (not members
of the Yahoo group). Most of these users suggested
answer b (only VC last step in all non CV addressed
modes) but no d (2 additonal CV inputs). We will
discuss in the company the results and see if we
really add the additional CV inputs for first/last
step. If we would have only the response from the
Yahoo group there would be no question and we would
simply add the CV inputs. 
For the oscillator mode we think about another
solution: a jumper on the pc board so that the user
could select between the two versions.
 
Best wishes
Dieter Doepfer"



SO...MEMBERS, KEEP ON VOTING FOR THE SOU MODULES AND
THE A154!!!:-)
BAKIS.



=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner

__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
http://calendar.yahoo.com