Doepfer

hello david,

i use vca's for this purpose, f.e. a132's together with an
a129/3 or a176, and of course an a180 for the input signal.
as far as i know there is no manufacturer who sells
such a doepfer-compatible "distribution"-module, you always
have to build it up with at least two standard modules.

best wishes

ingo



--- In Doepfer_a100@yahoogroups.com, David Salter <david.salter@r...> 
wrote:
> Hi List,
> 
> Last night whilst playing with my A100 I again found myself wanting 
a
> feature that I do not have.
> 
> A reverse mixer. So one input with a number of outputs with 
attenuators.
> 
> 
> I expect that DIY'ers will say this is an easy one to build and 
probably
> is, but does any one have something like this by a any supplier?
> 
> regards
> 
> David Salter
> 
> Tel: +44 20 7542 2402
> Mob: +44 7990562402
> Fax: +44 20 7542 2699
> 
> 
> 
> --------------------------------------------------------------- -
>         Visit our Internet site at http://www.reuters.com
> 
> Get closer to the financial markets with Reuters Messaging - for 
more

> information and to register, visit http://www.reuters.com/messaging
> 
> Any views expressed in this message are those of  the  individual
> sender,  except  where  the sender specifically states them to be
> the views of Reuters Ltd.
> 
> 
> 
> [Non-text portions of this message have been removed]

Hi List,

Last night whilst playing with my A100 I again found myself wanting a
feature that I do not have.

A reverse mixer. So one input with a number of outputs with attenuators.


I expect that DIY'ers will say this is an easy one to build and probably
is, but does any one have something like this by a any supplier?

regards

David Salter

Tel: +44 20 7542 2402
Mob: +44 7990562402
Fax: +44 20 7542 2699



--------------------------------------------------------------- -
        Visit our Internet site at http://www.reuters.com

Get closer to the financial markets with Reuters Messaging - for more
information and to register, visit http://www.reuters.com/messaging

Any views expressed in this message are those of  the  individual
sender,  except  where  the sender specifically states them to be
the views of Reuters Ltd.



[Non-text portions of this message have been removed]

Hi David

> is, but does any one have something like this by a any supplier?
Ken Stone has the Matrix Mixer.

Florian
-- 
Florian Anwander                  |ConSol*  Hewlett-Packard-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de

On 7/11/03 1:50 AM, "David Salter" <david.salter@reuters.com> wrote:

> Hi List,
> 
> Last night whilst playing with my A100 I again found myself wanting a
> feature that I do not have.
> 
> A reverse mixer. So one input with a number of outputs with attenuators.
> 
> 
> I expect that DIY'ers will say this is an easy one to build and probably
> is, but does any one have something like this by a any supplier?


check out the DOD 240 Resistance Mixer. it's just four  pots and 5 1/4"
jacks. Works well in reverse... of course simple to build.... but for the
price of a used one, it's about the same as parts ant the case for it.
I use mine in reverse to split the CV signal from a photo-theremin to 4
destinations, seems to work well, nice in a table top format especially if
you're using a tabletop controller... it is non-powered! again just 4 pots
and 5 jacks.
This would be a nice Doepfer module if priced just a bit more than a
mult(for the cost of pots).
best,
pH