Doepfer

Florian,

The trigger signal you have available, is this a mod to a A155?

Sounds useful.

Regards

David


                                                                                                                     
                    Florian Anwander                                                                                 
                    <Florian.Anwander@        To:     Doepfer_a100@yahoogroups.com                                   
                    consol.de>                cc:                                                                    
                    Sent by:                  Subject:     Re: [Doepfer_a100] seq comparison?                        
                    Florian.Anwander@c        Header:      Internal Use Only                                         
                    onsol.de                                                                                         
                                                                                                                     
                                                                                                                     
                    14/08/2001 10:54                                                                                 
                    Please respond to                                                                                
                    Doepfer_a100                                                                                     
                                                                                                                     
                                                                                                                     



Hi David, hi Evan,

> For real interaction I prefer the A155
I had the chance to work on a MAQ (and I work on a Schaltwerk :-) ), but I
prefer the "old school" style of real analogue sequencers, since you can fool
around with Gate and Notelevel independently.

I additionally have a trigger signal available, which only triggers on the first
beat of a bar. This I can use to resynchronize the sequence, if I fooled around
too much. This is quite difficult/nearly impossible to do with MIDI.


Florian

To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.





-----------------------------------------------------------------
        Visit our Internet site at http://www.reuters.com

Any views expressed in this message are those of  the  individual
sender,  except  where  the sender specifically states them to be
the views of Reuters Ltd.

Hi david

> The trigger signal you have available, is this a mod to a A155?
No. I use an external trigger created in emagic Logic with note events and
converted in my Harms MIDI/CV converter. The signal consists of:
- 96 notes per bar for Roland Sync clock
- 16 notes per bar for analog Seq clock
- One short note on the first beat of the bar for reset use -> This one 
  you may send to the reset-in of the A-155
- One note in the length of the complete bar (or longer if needed) for 
  starting the Roland sync. The latter solves the problem, that all
  MIDI/CV/Sync converters do not care, whether the sync starts on the 
  beginning of a bar.

Florian

-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de