Patches and discussion for Ensoniq VFX family

I'll work backwards here...last, the DX7 is not multitimbral, unlike its 4op 
cousins which can have two patches going. You could pick up a TX7 module for 
$50 or maybe less, have it in combo mode and assign it a different receive 
channel than the DX. next, the DX output is mono so pan would be a moot 
point. Release (release velocity?) is not available on the DX. Bear in mind 
it's a few years older than the vfx so its MIDI capabilities while pretty 
good, don't qiute equal the Ensoniq's. and first, the vfx slider in Timbre 
mode is controller#70 if I recall rightly while the DX slider is #6 so no 
equivalence there.

Here's what the DX has for cotroller response off the top of my pointy head:

#1 modulation
#2 breath controller
#3 pressure (early versions)
#4 foot control
#5 portamento rate
#6 data entry
#7 volume
#64 sustain
#65 portamento on/off

I hope this is of some help.
Lurking about, a former sd1 user
Mike Nelson
tuneful4@...

----- Original Message ----- 
From: "bobratica1020" <bobratica1020@...>
To: <Ensoniq-VFX-SD@yahoogroups.com>
Sent: Tuesday, February 22, 2005 7:32 PM
Subject: [Ensoniq-VFX-SD] Re: Ongoing Problem Please Help


>
>
> --- In Ensoniq-VFX-SD@yahoogroups.com, "bobratica1020"
> <bobratica1020@y...> wrote:
>>
>> For many years I have been trying to figure out how to control a
>> yamaha dx7 from vfx. I can get the sounds in preset and seqencer
>> mode but can't copntrol the performance(mode) volume, release etc.
>> from vfx. Their was a letter in transoniq hacker that says this is
>> possible but did not give detailed settings of how. I've tryed
> every
>> combination of buttons but nothing works. Ever year or so I ask
> this
>> question and nobody answers. Someone out their has to be
> controling
>> another synth with their vfx, please help.
>
>
> I recalibrated and now I have control of volume, but I still can't
> control release or pan. Will these work. Also can more than one
> sound be used from the dx7 at a time, when I try to use two tracks
> the sequence changes to the one now selected.Does anyone know and if
> you can use 2 or more how. Thanks
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
> 




--- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---