Patches and discussion for Ensoniq VFX family

Hi Claus,

Here is the specs from the VFX-SD Musician's Manual, page 1-4:

"Pedal/CV Specs: 3-conductor (Tip=control voltage input, Ring=2 KOhm
resistor to +12 Volts, Sleeve= ground). 68 KOhm input impedance, DC coupled.
Input voltage range=0 to 10 volts DC. Scan rate=32mS (maximum recommended
modulation input= 15 Hz). For use with an external control voltage, use a
2-conductor cable with the voltage on the tip and the sleeve grounded."

That's all she wrote.

I have a Morley compact volume pedal which I am planning on making the
modifications to.

I hope others in the group can use this information too, good luck!

-Rob

>From: Claus <clauzii@goowy.com>
>Reply-To: Ensoniq-VFX-SD@yahoogroups.com
>To: Ensoniq-VFX-SD@yahoogroups.com
>Subject: Re: [Ensoniq-VFX-SD] Has anyone ever made a CV-1 pedal?
>Date: Thu, 28 Sep 2006 16:56:43 GMT
>
>Since I lost my manual some years ago (It got stolen!) I would like those
>specs :)
>Well I have the CV-pedal and could take it apart, but a page from the
>manual is always welcome :)
>
>Have a nice weekend everyone - and I'm still working on the SoundSheet :)
>
>
>
>
>
>
>From: Robert Douglas[mailto:petromon13@hotmail.com]
>Sent: Wednesday, September 27, 2006 12:27 PM -07:00
>To: Ensoniq-VFX-SD@yahoogroups.com
>Subject: [Ensoniq-VFX-SD] Has anyone ever made a CV-1 pedal?
>
>
>Hi Everyone,
>
>Has anyone out there ever tried to build their own CV-1 control voltage
>pedal?
>
>I was flipping thru my VFX-SD Musicians Manual last night and noticed they
>give the spec's. on the CV-1 pedal, I had built one over 2 decades ago for
>an old ARP Odyssey by modifying and old farfisa volume pedal ,and it had
>some very interesting uses (wah-wah pedal, controlling pitch bend, etc.).
>
>According to the maulal, the CV-1 pedal can be used as a volume pedal, or
>can replace the modulation wheel when both hands are busy.
>
>Thought it might be a great project for some of the electronic techies in
>the group, I'd like to hear some ideas and would be happy to post the full
>spec from the manual if anyone is interested.
>
>-Rob
>
>
>