Patches and discussion for Ensoniq VFX family group photo

Yahoo Groups archive

Patches and discussion for Ensoniq VFX family

Index last updated: 2026-04-29 00:03 UTC

Message

Re: [Ensoniq-VFX-SD] Re: SD-1

2007-08-19 by River Of Life

Thank you all who sent me emails. I started working on my music for the morning service and in about 1/2 hour the keyboard was back to normal. I used it this morning at church and it worked fine also. I was on vacation and didn't use the keyboard for two week, so I guess it got a little temperamental.

Blessings,

Vince



At 10:51 AM 8/19/2007, you wrote:

Yes the Keyboard problems went on through the release of the SD1, even some of the EPS samplers had this issue. Go to the files section and get the file called Polyb12.zip this is the final service doc from Ensoniq that shows how to fix the poly board separation problem. The rest of the docs are misleading and don't explain clearly how to address this problem.

Rich


-----Original Message-----
From: l2web_net
To: Ensoniq-VFX-SD@yahoogroups.com
Sent: Sun, 19 Aug 2007 7:36 am
Subject: [Ensoniq-VFX-SD] Re: SD-1

I don't know if the SD-1 gets the same keyboard connector problem as
the VFX, but the symptoms sound similar.

--- In Ensoniq-VFX-SD@yahoogroups.com, River Of Life
wrote:
>
> Help! I just turned on my SD-1 and I found that every other note does
> not play, C does not play, D plays and C# plays, D# does not. This
> occurs up the entire keyboard. The unit does play the sequences
> properly. Any help would be appreciated.
>
> Vince
>

AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com .

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.