Patches and discussion for Ensoniq VFX family

The Battery won't cause the SD to not opperate, In fact the only unit I ever found that had that issue was the JX10. If the bat goes dead on the JX it will not play anything but the SD will simply display that the bat is dead and keep working.
?Rich

-----Original Message-----
From: Scott <NW7U@...>
To: Ensoniq-VFX-SD@yahoogroups.com
Sent: Sat, 15 Sep 2007 3:53 am
Subject: [Ensoniq-VFX-SD] SD-1 Finally Concked Out






Well, just for the heck of it, I left the power on for a couple hours 
and then cycled it and GUESS WHAT? It sprung back to life. OS and all 
had to be re-loaded, but it took off good as new. 

Used it for a couple hours and then shut it off. Two hours later, dead 
again. I'm thinking that with the power switch on, enough leakage is 
there to give the battery a quick boost. But it won't hold charge when 
shut off for a bit. 

If it's the battery, I can't really complain. This is the FACTORY 
batter, 16 years old. I know, I know, I should have changed it twice 
by now.

If anyone has better ideas on this, let me know.



 

________________________________________________________________________
Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com