Patches and discussion for Ensoniq VFX family

Hey, don't be :)

I was just refering to that I couldn't find a 1.2x version to put in
the files "EDE109" when I posted it ;)

The Disc OS needs a system program with matching version burned into
it, yes. I'd guess that the OS 2.0 Eprom set at Route66 would do the
job for You. At $26(Eproms)+($6 OS 2.1/2.0 disc)+post.

It might be that the 2.1 or 2.3 versions are for the newer keyversion,
I don't know. Mail route66, they should be able to help, by (serial
number or something to determine exact model and OS/EPROMs needed).

Claus, DK.

--- In Ensoniq-VFX-SD@yahoogroups.com, "poipoi12321" <poipoi12321@...>
wrote:
>
> --- In Ensoniq-VFX-SD@yahoogroups.com, "poipoi12321" 
> <poipoi12321@> wrote:
> >
> > --- In Ensoniq-VFX-SD@yahoogroups.com, Claus <clauzii@> wrote:
> > >
> > > I would get a System 2.1  (both eproms and os-disc). It might be 
> a 
> > bit more expensive, but in my years of using VFX (18!), I haven't 
> > found any version 1.2.
> > > Hope You get it up and running :)
> > > 
> > > Claus, DK. 
> > > 
> > > 
> > > 
> > > -----Original Message-----
> > > From: poipoi12321@
> > > Sent: Thursday, September 18, 2008 11:19 AM -07:00
> > > To: Ensoniq-VFX-SD@yahoogroups.com
> > > Subject: [Ensoniq-VFX-SD] Re: System disk for VFX-SD.
> > > 
> > > thank you,but the vfx-sd OS 1.20 isn't in www.syntaur.com nor in 
> > ebay.
> > > that's why i need a copy of the file ;something like
> > ( vfxsdos120.EDV).
> > > to make another system disk.
> > >
> > I have a vfx-sd (ROM v1.20 KPC 220) I tried the (OS 210)but it 
> > doesn't work,a problem of incompatibility.what shall i do ?
> >
> Sorry Claus,may be you are right..the system disk i had was 
> containing a SEQUENCER OS V1.21 which should work with ROM OS V1.20 
> or higher.
>