Patches and discussion for Ensoniq VFX family

--- In Ensoniq-VFX-SD@yahoogroups.com, Claus <clauzii@...> wrote:
>
> I'm not 101% sure, but I can't see why it shouldn't, if the eproms 
you get are ok.
> Let's hope it works!
> 
> Claus, DK
> 
> 
> 
> -----Original Message-----
> From: poipoi12321@...
> Sent: Friday, September 19, 2008 7:55 PM -07:00
> To: Ensoniq-VFX-SD@yahoogroups.com
> Subject: [Ensoniq-VFX-SD] Re: System disk for VFX-SD.
> 
> --- In Ensoniq-VFX-SD@yahoogroups.com, "Claus" <clauzii@> wrote:
> >
> > Hey, don't be :)
> > 
> > I was just refering to that I couldn't find a 1.2x version to put 
in
> > the files "EDE109" when I posted it ;)
> > 
> > The Disc OS needs a system program with matching version burned 
into
> > it, yes. I'd guess that the OS 2.0 Eprom set at Route66 would do 
the
> > job for You. At $26(Eproms)+($6 OS 2.1/2.0 disc)+post.
> > 
> > It might be that the 2.1 or 2.3 versions are for the newer 
> keyversion,
> > I don't know. Mail route66, they should be able to help, by 
(serial
> > number or something to determine exact model and OS/EPROMs 
needed).
> > 
> > Claus, DK.
> > 
> > --- In Ensoniq-VFX-SD@yahoogroups.com, "poipoi12321" 
<poipoi12321@>
> > wrote:
> > >
> > > --- In Ensoniq-VFX-SD@yahoogroups.com, "poipoi12321" 
> > > <poipoi12321@> wrote:
> > > >
> > > > --- In Ensoniq-VFX-SD@yahoogroups.com, Claus <clauzii@> wrote:
> > > > >
> > > > > I would get a System 2.1  (both eproms and os-disc). It 
might 
> be 
> > > a 
> > > > bit more expensive, but in my years of using VFX (18!), I 
> haven't 
> > > > found any version 1.2.
> > > > > Hope You get it up and running :)
> > > > > 
> > > > > Claus, DK. 
> > > > > 
> > > > > 
> > > > > 
> > > > > -----Original Message-----
> > > > > From: poipoi12321@
> > > > > Sent: Thursday, September 18, 2008 11:19 AM -07:00
> > > > > To: Ensoniq-VFX-SD@yahoogroups.com
> > > > > Subject: [Ensoniq-VFX-SD] Re: System disk for VFX-SD.
> > > > > 
> > > > > thank you,but the vfx-sd OS 1.20 isn't in www.syntaur.com 
nor 
> in 
> > > > ebay.
> > > > > that's why i need a copy of the file ;something like
> > > > ( vfxsdos120.EDV).
> > > > > to make another system disk.
> > > > >
> > > > I have a vfx-sd (ROM v1.20 KPC 220) I tried the (OS 210)but 
it 
> > > > doesn't work,a problem of incompatibility.what shall i do ?
> > > >
> > > Sorry Claus,may be you are right..the system disk i had was 
> > > containing a SEQUENCER OS V1.21 which should work with ROM OS 
> V1.20 
> > > or higher.
> > >
> >
> yes clauz, I bought 2 eproms v2.0 + os disk 2.10 from ebay,and I'm 
> still waiting for them.my vfx has: ROM=v1.20 KPC=200. Will this 
> eproms work for my synth ??!
>
I hope so clauzzi,anyway thank you for posting the vfx images...