Patches and discussion for Ensoniq VFX family group photo

Yahoo Groups archive

Patches and discussion for Ensoniq VFX family

Index last updated: 2026-04-29 00:03 UTC

Message

Re: [Ensoniq-VFX-SD] Re: SD-1 32 analog values problem

2008-10-12 by Claus

It's actually not often a capacitor 'blows'. Mainly they do when they 
get too hot. Or if a polarized one get turned the wrong way around.
Nice to know that the A/D cap can blow, if non-intended funny 
modulation is what's happening.

Claus, DK

-----Original Message-----
From: soundthinker2001 <roger17@...>
To: Ensoniq-VFX-SD@yahoogroups.com
Sent: Sun, 12 Oct 2008 2:48 am
Subject: [Ensoniq-VFX-SD] Re: SD-1 32 analog values problem

























--- In Ensoniq-VFX-SD@yahoogroups.com, "tijgersanni"

<m.c.breukink@...> wrote:

>

> --- In Ensoniq-VFX-SD@yahoogroups.com, Claus <clauzii@> wrote:

> >

> > And all the fuses are ok? (You probably checked allready..)

> >

> > Claus,DK

> >

>

> Claus, thank you for your reaction

>

> I have not checked all the fuses, but i will do that.

> I will also look at the circuit around chip 4051 with a scoop and a

> voltmeter.

>



Hi.

I had an "analog" problem with my previous SD-1/32 some years ago that

caused it to sound like the patch was being randomly modulated when it

wasn't.



The SD multiplexes all it's analog input sources (mod wheel, pitch

wheel, etc) and then sends the multiplexed result to the A/D converter

chip. But note. It filters this multiplexed total through a Cap. prior

to being delivered to the A/D.  If this Cap. is faulty, then the A/D

gets sent all sorts of spurious values. I sent my SD-1 to the local

service agent (here in Australia), who had it for two months and

couldn't fix the fault. The chief tech at Yamaha (who had a look at it

as a favor) found it in 30 minutes!! He also provided me with this

explanation. (I'm no technician - you can probably tell).



So I don't have a component ID because I don't have a circuit diagram,

(but try searching old postings, because I have posted this answer

once before...), but just look for the last Cap. prior to the A/D

Converter chip, you may well have your answer.



good luck



Roger









    
	
	




	
	



________________________________________________________________________
Don't let your email address define you - Define yourself at 
http://www.tunome.com today!

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.