Patches and discussion for Ensoniq VFX family

On Fri, 2009-05-08 at 20:24 +0000, jeffsbluesdeville wrote:
> You will find the fix for this in the files/tools and service folder
> on this group's message board.  I did the fix a few years ago and have
> had no problems since until this week.  Probably cheap solder and poor
> technique.  I'll try it again soon with a good cleaning with a solder
> sucker and silver solder this time. 

Silver solder has a really high melting point, and may damage your
board.  Perfectly ordinary lead/tin solder should be okay (lead-free
solder is a waste of time) as long as the pads and wires are nice and
clean.

Gordon