Patches and discussion for Ensoniq VFX family

--- In Ensoniq-VFX-SD@yahoogroups.com, "Claus" <clauzii@...> wrote:
>
> If after resoldering the connections, You still get the error, try unscrewing the whole keyboard. On the underside there is a circuit board for the keyboard. It has some connections with some wirepins, which can oxidize. Unscrew that board, clean the pins and also push the EPROM (chip with paperlabel) into it's socket. Also remember to clean the ribbon cable connections from the keyboard to the motherbord.
> 
> If all this >does not< help, You are in for a repair at a shop.
> 
> Best,
> Claus
>