http://www.reichelt.de/?;ACTION=6;LA=3;ARTICLE=27893;GROUPID=3278;GROUP=C223;SID=31CVn-xKwQAR8AAAPWIso8badebe6a421948a7a14b6b7a20fc2de
Look for the part nr.
US # MJTP1230 / EU # PHAP3301
US Model Dim. EU Model
No. L (in./mm) No.
MJTP1230 .170 (4,3) PHAP3301
MJTP1230A .197 (5,0) PHAP3301A
MJTP1230B .374 (9,5) PHAP3301B
MJTP1230C .315 (8,0) PHAP3301C
MJTP1230D .512 (13,0) PHAP3301D
MJTP1230E .287 (7,3) PHAP3301E
MJTP1230F .335 (8,5) PHAP3301F
MJTP1230G .275 (7,0) N/A
Most likely you'll need the type MJTP1230B .374 (9,5) PHAP3301B (height 9mm = .374 inch)
which you can order from www.reichelt.de with order nr TASTER 3301B.
Check if this is the size which will fit for your board. It's only the height (L) which
is relevant. The other values I'm sure about.
Reichelt will be able to deliver outside EU if you don't find a US supplier.
I hope this helps.
Hans
neurokrash schrieb:
--- In Ensoniq-VFX-SD@yahoogroups.com, "neurokrash" ...> wrote:
>
> > I usually buy them in huge bags from Chinese guys on eBay, for a small
> > amount.
>
> Is there a name or part number that you can suggest?
I would greatly appreciate any information you can provide on the correct switches. I ordered some from Syntaur that were supposed to work, but they were too small in every dimension and the physical buttons will not activate them. I would like to find a more appropriate replacement.
Thanks
--
Hans Artmann
Flüggenstr.
10
80639
München
Tel +49
89 17095720
Fax
+49 89 17095722
Mob
+49 151 17413090