Patches and discussion for Ensoniq VFX family

Some fan noise, of course. But no radio interference. The fan is low voltage DC, after all. It's probably spec'ed to be quiet since it came from a computer.

Eric




________________________________
From: Sonic Amigos Support <sasupport@...>
To: Ensoniq-VFX-SD@yahoogroups.com
Sent: Mon, November 2, 2009 6:53:42 PM
Subject: Re: [Ensoniq-VFX-SD] Re: Ensoniq VFX freeze during calibration

   
On Nov 2, 2009, at 6:36 PM, Eric Hall wrote:

> I just took a 12V fan from a junk computer and and hooked it up to 
> an old 9 volt wall-wart power supply. Took a couple of expansion 
> type picture hangers and stuffed them in the fins, secured the fan 
> to that, viola - instant cooling. Works like a charm. Total cost? $0.

I thought of doing something like that too, but I was concerned about 
the noise that the fan might introduce. Not so?

Erick