Patches and discussion for Ensoniq VFX family group photo

Yahoo Groups archive

Patches and discussion for Ensoniq VFX family

Index last updated: 2026-04-29 00:03 UTC

Message

Re: [Ensoniq-VFX-SD] Re: Step Sequencing

2010-05-20 by Will Robinson

Software Version 2.0 added Step Entry Recording. Make sure you have OS 2 or higher. One of the features added was Temporary Record Bypass; holding down the REC button while in step entry mode. This gives you a moment to noodle around before committing to recording. 
Info from the manual supplement P/N 9311 0026 01 - B.




________________________________
From: az_spunky <danrue@...>
To: Ensoniq-VFX-SD@yahoogroups.com
Sent: Thu, May 20, 2010 1:47:30 PM
Subject: [Ensoniq-VFX-SD] Re: Step Sequencing

  
There is step recording on the VFX-SD.  Check the manual, page 12-15 "Event Edit"

http://www.soundprogramming.net/manuals/Ensoniq_VFX-SD_Manual.pdf

You step through the event list for an individual track in a sequence or song.

--- In Ensoniq-VFX-SD@yahoogroups.com, Rish <rish@...> wrote:
>
> Chances are that is not a hardware issue as the seq was updated all 
> the time in the OS and the firmware.
> What versions do you have?
> Rish
> 
> Sent from my iPod
> 
> On May 20, 2010, at 1:15 AM, "sumguy231" <abc4e@...> wrote:
> 
> > Bummer, but on the other hand that may help answer my question about 
> > hardware versions. When was yours made?
> >
> > --- In Ensoniq-VFX-SD@yahoogroups.com, "rrsw_ccs" <79flh@> wrote:
> > >
> > > Don't have that option on my VFX-SD. :(
> > >
> > > --- In Ensoniq-VFX-SD@yahoogroups.com, Claus <clauzii@> wrote:
> > > >
> > > >
> > > > Hi!
> > > > To enter STEP recording, press the SEQ-CONTROL button. On page 3 
> > it says STEP-ENTRY-OFF. Set this to on. When You enter recording, 
> > the track will be on the first bar and tick
> > > > and You can select the step size accordingly. Press a key with 
> > the velocity You want, and the sequencer advances to the next step. 
> > If You don't need a note on a specific step, press
> > > > STEP, and the event will be empty.
> > > >
> > > > Hope this helps. I might write a DOC on steprecording. Until 
> > then, feel free to ask :)
> > > >
> > > > Best, AudioSaucer, DK
> > > > Claus
> > > >
> > >
> >
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.