Patches and discussion for Ensoniq VFX family

I thought SD-1s didnt have the two-piece keybed?

----- Original Message ----- 
From: "Mike Morales" <mm9745@...>
To: <Ensoniq-VFX-SD@yahoogroups.com>
Sent: Tuesday, March 08, 2011 4:31 PM
Subject: Re: [Ensoniq-VFX-SD] SD-1 crash



The fix is soldering the keyboard connectors at the split.

The quick fix at gigs if you have an error is to place both hands on the 
center keys of the keyboard and press till you hear a creak that usually 
fixes the keyboard error without rattling other things.

--- On Wed, 3/9/11, vocedave2002 <vocedave2002@...> wrote:

From: vocedave2002 <vocedave2002@...>
Subject: [Ensoniq-VFX-SD] SD-1 crash
To: Ensoniq-VFX-SD@yahoogroups.com
Date: Wednesday, March 9, 2011, 12:16 AM

















      Hi Folks,



This has probably been addressed before...



I was playing the other night and got the dreaded Keyboard Error message a 
few times in a row after it recal'd.  Being out on a gig I couldn't open the 
keyboard and spray the connectors so I turned the SD-1 off and shook it a 
few times.  I then rebooted and the errors went away, unfortunately so did 
some of the internal sounds.  For instance:  INT4 is now GREASE-PLUS 
CRYSTALLY ' ' ' ' and INT5 is now MOOG-MUTE @@@@@@... anyway you get the 
idea.  Any thoughts on fixing this would be greatly appreciated.



Best,



/Dave