Patches and discussion for Ensoniq VFX family

On 6 Jun 2011, at 21:27, Jon Carroll wrote:

> I thought of doing this too, specially since the memory is an off the shelf 
> inexpensive part. You'd have to get the bodies made, tho.

I think I could live without necessarily having a body on the cartridge, if it was otherwise functional.

It seems that someone is already doing something similar for ESQ-1 cartridges, which I know are not quite the same but seem similar

  http://cgi.ebay.co.uk/250829873548

> Assuming the cartridge is only using a two-layer PCB (which i don't know) we 
> could image it and try to make a copy.

Alas I don't have any to image, or make a copy of - hence my question.

Best wishes,

// Christian

> 
> ----- Original Message ----- 
> From: "Christian Brunschen" <cb@...>
> To: <Ensoniq-VFX-SD@yahoogroups.com>
> Sent: Monday, June 06, 2011 9:03 AM
> Subject: [Ensoniq-VFX-SD] Stor-Cart.32 schematic?
> 
> 
>> Hi all,
>> 
>> Since a Stor-Cart.32 is not entirely inexpensive or easy to come by at 
>> this time, does anyone have a schematic / layout (including the pinout of 
>> the connector) for these? It might be useful to have, so that it's 
>> possible to make your own.
>> 
>> Best wishes,
>> 
>> // Christian Brunschen
>> 
>> 
>> 
>> ------------------------------------
>> 
>> Yahoo! Groups Links
>> 
>> 
>> 
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>