Patches and discussion for Ensoniq VFX family

no, I already knew that, I have soft1 and it does not work.

--- In Ensoniq-VFX-SD@yahoogroups.com, "Bill Tomlinson" <tomlinson6050@...> wrote:
>
> 
> 
> First, Go to MASTER and check the TOUCH settings - there are 16 choices:
> SOFT, MEDIUM, FIRM and HARD control the velocity response. Each of those four setting have four numbered variations: I.e. SOFT2, MEDIUM4, HARD1 etc. The number (1,2,3,4) indicated the aftertouch response. "1" is easiest, "4" is hardest.
> 
> On mine, the rubber bushings that the key hits when it reaches bottom were hardened out from age(?) and made it too hard to press the keys down far enought to activate aftertouch well. I used a razor blade and cut the white key bushings thinner and restored the function. WARNING !!! do not cut them SHORTER !!! You'll ruin them. Send me an email and I'll send you a rough, shaky sketch of what I did.
> 
> tomlinson6050@...
>