yes you can change the chip but getting one is your
problem
the ottis
not otto the otto is used in the ts10
;
the ottis is used in the vfx the sd1 the
sq1/2/sqr1+/sq1+ ks32
so you have a few synths that use it syntaur does
not have any spare
so you need to try thesonic as he might be the only
one with a spare chip
first check if your chip is socketed some are
socketed and some are soldered in
if yours is socketed try pushing on it to make sure
its firmly in place as they can move over time
on the ts10/12 forum some one had the same problem
with there otto chip and he had to replace his
hope this helps
----- Original Message -----From: fddiCc: River Of LifeSent: Sunday, April 01, 2012 9:06 AMSubject: Re: [Ensoniq-VFX-SD] transpose problemthe tune parameter is working the transose is not... and all the keys perform 2 tones above normal...
If it is a problem of the otto chip is possible replace it ?
it is difficult nowdays to find someone who is able to repair these keyboards...
thanks
Rick
On 4/1/12 2:16 AM, River Of Life wrote:There is a tune parameter on the system page also. Check that.
Vince
At 07:14 PM 3/31/2012, you wrote:
Hello...
only today after a few days my SD-1 arrived I Realized the keyboard is
completely detuned!
the SD1 plays something like 2 tones higher than normal like if it is
transposed.
I checked for the transpose page and the patches are not transposed at
all and the values in the transpse page are: +0 +00
but here with great surprise I noticed that changing the transpose
parameter is useless, they are completely ignored!!
Is there something I am missing or this is just a broken SD-1 ??
thank you very much
Rick