Patches and discussion for Ensoniq VFX family

Hi Bill,

Basically one of the long sides broke off cleanly, showing
glue marks. Both circuit board and cartridge only fit in one 
way but I will try flipping the socket inside the top panel 
per your suggestion...


thanx!


sos

--- In Ensoniq-VFX-SD@yahoogroups.com, <tomlinson6050@...> wrote:
>
> 
> ---- "whoi.geo" <sonofspy777@...> wrote: 
> 
> =============
> Hi1
> 
> My first post...bought a used VFX-SD...(one of the later ones as the
> connection between the under-keyboard circuit boards is a 2-layer socket)everything works perfectly...however I had ordered a NOS Voice Crystal cartridge from a store in Florida, the case for the cartridge arrived broken, 
> 
> ==================================================
> Long shot here:
> 1) is the cartridge broken so badly the it will fit in the socket backwards? There's no index on the contacts, just the diference in the thickness of the sides of the cartridge that makes it fit one way.
> 2)The copper traces on the PC board in the cartridge are very small. If the board is cracked at all, that might do it.
> 3) Just finished fixing an Ensoniq SQ80 (ancestor of the VFX) Someone had removed the cartridge socket from the slot in the case and had put it back UPSIDE DOWN. Same synptoms: synth worked and sounded finem but did not recognize the cartridge.
> 
> Bill
>