Patches and discussion for Ensoniq VFX family

I've never had that problem before.  Sounds like you may have some chips that may be going bad.  I would open it up and clean it out and make sure that the chips are seated correctly.  

I would also perform a hard reset and see what happens.

Grace, 
Harry


--- In Ensoniq-VFX-SD@yahoogroups.com, <tomas_peterka@...> wrote:
>
> Hi,
>   
>  I´ve just bought VFX OS 2.10. Suprisingly there is no keyboard callibration problem, but there are few others:
>   
>  - occassional strange crackles/pops on envelope starts - some of my sounds have crackles/pops when the envelopes are retriggered, not every time, but the crackles are annoying (especially on pads) - can anybody test the Moog Taurus bass sound from the "Lot converted" archive - the legato play makes the crackle on every key press (it is independent on DSP settings, makes crackles even if the effect is off)
>  - Error 32 - I can´t play any organ sound that use Rotary Speaker FX - the VFX immediately goes to error 32 and needs to be reinitialized, after selecting the rotary speaker effect or sound that use it 
>  - battery low (will be replaced, no problem here)
>   
>   
>  Does anybody have the same problems? Is the OS 2.30 a solution or do these symptoms indicate some problems with DSP or other chips? Besides above mentioned problems the VFX is stable and works for 12 hours now.
>   
>  Thanks for help
>   
>  Tomas
>