I´ve replaced the battery and the Error 32 seems to be solved ... strange, both rotary speaker DSP algorithms seems to work OK now.
The envelope pops persist ... seems to be an OS problem in my opinion. I have unfortunately no chance to check the same sounds on a different machine (my friend´s VFX-SD broke yesterday .... no sound output at all).
Anyway does anybody have the image of the OS 2.30 EPROMs. Route66 have not responsed to my mail order :( I can make the EPROMs myself, but I do not have the bin files.
---In ensoniq-vfx-sd@yahoogroups.com, <musicwithharry@...> wrote:
I've never had that problem before. Sounds like you may have some chips that may be going bad. I would open it up and clean it out and make sure that the chips are seated correctly.
I would also perform a hard reset and see what happens.
Grace,
Harry
I would also perform a hard reset and see what happens.
Grace,
Harry
--- In Ensoniq-VFX-SD@yahoogroups.com, <tomas_peterka@...> wrote:
>
> Hi,
>
> I´ve just bought VFX OS 2.10. Suprisingly there is no keyboard callibration problem, but there are few others:
>
> - occassional strange crackles/pops on envelope starts - some of my sounds have crackles/pops when the envelopes are retriggered, not every time, but the crackles are annoying (especially on pads) - can anybody test the Moog Taurus bass sound from the "Lot converted" archive - the legato play makes the crackle on every key press (it is independent on DSP settings, makes crackles even if the effect is off)
> - Error 32 - I can´t play any organ sound that use Rotary Speaker FX - the VFX immediately goes to error 32 and needs to be reinitialized, after selecting the rotary speaker effect or sound that use it
> - battery low (will be replaced, no problem here)
>
>
> Does anybody have the same problems? Is the OS 2.30 a solution or do these symptoms indicate some problems with DSP or other chips? Besides above mentioned problems the VFX is stable and works for 12 hours now.
>
> Thanks for help
>
> Tomas
>