Patches and discussion for Ensoniq VFX family

That sounds neat.  That would be perfect for when you are moving the stuff from the floppies to the emulator.  use the floppy and load what you want into the VFX, flip a switch to the emulator and save the stuff from the VFX.  THAT is cool and something that sounds like it might work on a permanent installation too if you configure the switch correctly.  Have them both hooked up and just run a switch to switch between the two...

Grace, 
Harry

--- In Ensoniq-VFX-SD@yahoogroups.com, <yveco44@...> wrote:
>
> Hello, 
>  I recently installed an emulator 3.5 "floppy on my VFX-SD. The original drive is still operational. As VFX-SD can not handle two drives, you must install an inverter switch on the cloth (wire order No. 10 (check)) to select either the original drive or the emulator. 
>  Emulator is installed HxC2001 Rev C. All works very well. I made ​​some pictures, but I do not know how to send them. If you are interested, please let me know. 
>  Best regards.
>