Patches and discussion for Ensoniq VFX family

>    From: "mebigguyx" <mebigguyx@...>
> I just bought an SD-1.  It seems like the pressure feature is not
> working. With the pressure set to either chan or poly, I cannot get
> the pressure to affect the pitch (or anything else).

The sax patches in the ROM are definitely poly-pressure sensitive. You 
can use them to check out your poly pressure. I just took delivery on 
an SD-1 myself, and it is definitely stiffer than the VFXsd is. Try 
setting the pressure sensitivity to SOFT-1 in the SYSTEM pages just to 
see if your pressure sensor is working OK.

The pressure feature works --- just not like I expected.  Thanks for 
the replies

meBig


--- In Ensoniq-VFX-SD@yahoogroups.com, Joe McMahon <mcmahon@i...> 
wrote:
> >    From: "mebigguyx" <mebigguyx@y...>
> > I just bought an SD-1.  It seems like the pressure feature is not
> > working. With the pressure set to either chan or poly, I cannot 
get
> > the pressure to affect the pitch (or anything else).
> 
> The sax patches in the ROM are definitely poly-pressure sensitive. 
You 
> can use them to check out your poly pressure. I just took delivery 
on 
> an SD-1 myself, and it is definitely stiffer than the VFXsd is. Try 
> setting the pressure sensitivity to SOFT-1 in the SYSTEM pages just 
to 
> see if your pressure sensor is working OK.