Synth-DIY Yahoo! Groups Archives

Thread

SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO

2004-10-16 by homebythe_sea

Hi ,

I am still having trouble with my sd1. I sprayed contact cleaner on 
the data slider, volume control and the mod and pitch wheels. 

I set the pitch bend to 0 and when doing so I noticed the parameters 
were changing rapidly and by them selves. It seemed to me that a 
data slider or button is throwing out the change commands.

I cant be sure but I think the data slider is the culprit. Does 
anyone know of a way to disable it?

I have a gig next week, and im screwed so far.

Thanks
Rich

Re: [Ensoniq-VFX-SD] SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO

2004-10-16 by Frank Crawford

I had the same problem.  I didabled the slider.  It did not solve the
problem


----- Original Message -----

Show quoted textHide quoted text

From: "homebythe_sea" <homebythe_sea@...>
To: <Ensoniq-VFX-SD@yahoogroups.com>
Sent: Saturday, October 16, 2004 10:08 AM
Subject: [Ensoniq-VFX-SD] SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO


>
>
> Hi ,
>
> I am still having trouble with my sd1. I sprayed contact cleaner on
> the data slider, volume control and the mod and pitch wheels.
>
> I set the pitch bend to 0 and when doing so I noticed the parameters
> were changing rapidly and by them selves. It seemed to me that a
> data slider or button is throwing out the change commands.
>
> I cant be sure but I think the data slider is the culprit. Does
> anyone know of a way to disable it?
>
> I have a gig next week, and im screwed so far.
>
> Thanks
> Rich
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Re: [Ensoniq-VFX-SD] SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO

2004-10-17 by Kaltar

I Had A Similar Problem With An Ensoniq SQ2. I Connect It Into A 
Sequencer And Record All The Changes It Did By itself.
I Think It Could Be A Failure In The Sensor Chip, Not The Contact 
Itself =(
Take It To the Doctor!

Show quoted textHide quoted text

On Oct 16, 2004, at 7:54 PM, Frank Crawford wrote:

>
> I had the same problem.  I didabled the slider.  It did not solve the
> problem
>
>
> ----- Original Message -----
> From: "homebythe_sea" <homebythe_sea@...>
> To: <Ensoniq-VFX-SD@yahoogroups.com>
> Sent: Saturday, October 16, 2004 10:08 AM
> Subject: [Ensoniq-VFX-SD] SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS 
> TOO
>
>
>>
>>
>> Hi ,
>>
>> I am still having trouble with my sd1. I sprayed contact cleaner on
>> the data slider, volume control and the mod and pitch wheels.
>>
>> I set the pitch bend to 0 and when doing so I noticed the parameters
>> were changing rapidly and by them selves. It seemed to me that a
>> data slider or button is throwing out the change commands.
>>
>> I cant be sure but I think the data slider is the culprit. Does
>> anyone know of a way to disable it?
>>
>> I have a gig next week, and im screwed so far.
>>
>> Thanks
>> Rich
>>
>>
>>
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

RE: [Ensoniq-VFX-SD] SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO

2004-10-18 by Rodney Mcdonald

It doesn't sound like pitch bend, per se - its probably the modulation
wheel.  Try this test...
 
Try moving the mod wheel up&down - is this changing the pitch?  If so, you
can disable it by changing where it says *MOD* to "OFF" in all the voices in
the patch you are using? Then save the patch.
 
That should do it from my experience.
 
Rodney

Show quoted textHide quoted text

-----Original Message-----
From: homebythe_sea [mailto:homebythe_sea@...] 
Sent: Saturday, October 16, 2004 10:08 AM
To: Ensoniq-VFX-SD@yahoogroups.com
Subject: [Ensoniq-VFX-SD] SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO

Hi ,

I am still having trouble with my sd1. I sprayed contact cleaner on 
the data slider, volume control and the mod and pitch wheels. 

I set the pitch bend to 0 and when doing so I noticed the parameters 
were changing rapidly and by them selves. It seemed to me that a 
data slider or button is throwing out the change commands.

I cant be sure but I think the data slider is the culprit. Does 
anyone know of a way to disable it?

I have a gig next week, and im screwed so far.

Thanks
Rich

Yahoo! Groups Sponsor	

ADVERTISEMENT

<http://us.ard.yahoo.com/SIG=129snv696/M=315388.5497957.6576270.3001176/D=gr
plch/S=1705032144:HM/EXP=1098022091/A=2372354/R=0/SIG=12id813k2/*https://www
.orchardbank.com/hcs/hcsapplication?pf=PLApply&media=EMYHNL40F21004SS> click
here	

<http://us.adserver.yahoo.com/l?M=315388.5497957.6576270.3001176/D=grplch/S=
:HM/A=2372354/rand=864286028> 	

  _____  

Yahoo! Groups Links

*	To visit your group on the web, go to:
http://groups.yahoo.com/group/Ensoniq-VFX-SD/
<http://groups.yahoo.com/group/Ensoniq-VFX-SD/> 

*	To unsubscribe from this group, send an email to:
Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
<mailto:Ensoniq-VFX-SD-unsubscribe@yahoogroups.com?subject=Unsubscribe> 

*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

Patches and discussion for Ensoniq VFX family

SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO

SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO

Re: [Ensoniq-VFX-SD] SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO

Re: [Ensoniq-VFX-SD] SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO

RE: [Ensoniq-VFX-SD] SD1 STILL GOING OUT OF TUNE AND WEIRD THINGS TOO

Move to quarantaine