Patches and discussion for Ensoniq VFX family group photo

Yahoo Groups archive

Patches and discussion for Ensoniq VFX family

Index last updated: 2026-04-29 00:03 UTC

Thread

GM Drum Map for VFX-SD

GM Drum Map for VFX-SD

2004-10-23 by Harry

Hello group, I hope that are doing well.

I am writing a new song using the Ensoniq drums (Ballad-Kit) and was 
wondering if anyone figured out a drum map that configured to GM 
without using the sequencer or preset portion of the synth.

I love the entire kit of the Ballad-Kit, but since it is pre-GM, I am 
having to use two tracks for drums now, one for GM and the other just 
for the Ensoniq (on a different MIDI channel too).

I have created a custom kit that utilizes the kick/snare type deal, 
but want to use all of the sounds in the drum kit.

Can anyone help?

Thank you, 

Harry Ebbeson III
Ebbeson Management Group
www.geocities.com/ebbrecords

Re: [Ensoniq-VFX-SD] GM Drum Map for VFX-SD

2004-10-25 by Frank Crawford

what exactly are you asking for?  roland and 808 drums are gm.  I also have
done a conversion map from ballad kit to gm in the giebler
program.............frank
----- Original Message -----
Show quoted textHide quoted text
From: "Harry" <ebbrecords@...>
To: <Ensoniq-VFX-SD@yahoogroups.com>
Sent: Friday, October 22, 2004 11:39 PM
Subject: [Ensoniq-VFX-SD] GM Drum Map for VFX-SD


>
>
> Hello group, I hope that are doing well.
>
> I am writing a new song using the Ensoniq drums (Ballad-Kit) and was
> wondering if anyone figured out a drum map that configured to GM
> without using the sequencer or preset portion of the synth.
>
> I love the entire kit of the Ballad-Kit, but since it is pre-GM, I am
> having to use two tracks for drums now, one for GM and the other just
> for the Ensoniq (on a different MIDI channel too).
>
> I have created a custom kit that utilizes the kick/snare type deal,
> but want to use all of the sounds in the drum kit.
>
> Can anyone help?
>
> Thank you,
>
> Harry Ebbeson III
> Ebbeson Management Group
> www.geocities.com/ebbrecords
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Re: GM Drum Map for VFX-SD

2004-10-26 by Harry

Thank you for the response.  

I am looking for a way to copy a drum kit, mainly the Ballad-Kit 
because of the big toms, into a map that is compatible with GM so 
that I may use the Ensoniq drums (all of them in the kit) in 
sequences that I have written.  
I play in a band where I am the keyboardist, bassist and drummer; the 
majority of bass and all drums are done in the sequencer.  I 
currently use my Roland XP60 as the main sequencer.  I also use the 
sounds in it, including the drums.  I trigger an Alesis QS6, which is 
mainly on a preset(s) I have created that use drums and bass, to get 
a fuller drums and bass sound.
I have the bass parts taken care of because they go to their 
respective channel from the XP60 and trigger anything on Channel 7.
Since I have gotten my VFX-SD, I have fallen in love with the ballad 
kit again, and currently have a custom kit that uses the kick and 
snare from that kit.
The problem is this:  I do not have the sequencer loaded in the VFX-
SD, because the floppy drive does not work.  This forces me to use 
template for tracks 1-12 on the VFX-SD as my multi-timbral setup on 
that synth.  I do not anticipate getting the unit fixed until after 
the 1st of the year or when taxes come back, whichever allows for the 
funds to do so (I have my Christmas album from 2003 and my 2002 
release, Finding Hope, selling in stores in the area and online).
Right now, I am writing music my another album and I am currently 
using track 10 for the drums (all the GM drums of course) and track 
11 for the VFX alone.  Combining the kits make for a wonderful drum 
kit (especially on the toms and snare) and I would like to be able to 
do that in every song I do (for the cover band and/or for my own 
music), with the ballad kit and the other kits I trigger on my GM 
machines.
I remember somewhere, probably in the Transoniq Hacker, where someone 
brought up the issue of GM kits on the VFX and SD-1 and I do not 
remember if it was answered.

I hope that helps.  If there was a way that I could convert the data 
file to a file that can be read by my Roland XP60 or Yamaha MDF-II 
Data Filer, that would be great too.  My computer is set up for 
strictly computer and administrative duties, rather than MIDI.

I downloaded the Geibler software to convert stuff to a format the 
VFX could read, but the program said my floppy drive was not 
compatible, so I gave up.  

I also got a hold of Thesoniq today and he did not give specific 
pricing on what it would cost to get my synth fixed, other than it 
was $70 for labor and $75 for the new floppy.  I am going to get the 
entire synth redone (new ROMs, updated O/S and whatever else I can do 
to make it new again), but again, that will be after the 1st of the 
year.

I hope this explains it a little better.  I sure am happy that I got 
the VFX; I had been looking for one for many years and finally found 
one in the pawn shop for $250.00 .  Once I get it up and running 100% 
with the sequencer and other sounds accessible by floppy, I will be 
pleased.

Thank you, 

Harry Ebbeson III
Ebbeson Management Group
www.geocities.com/ebbrecords

Re: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD

2004-10-26 by Frank Crawford

punch up the ballad kit, write down all the settings from edit drum map
page, then select a drum kit in the int bank so you can save it, reproduce
the settings you wrote down, in a gm map............frank
----- Original Message -----
Show quoted textHide quoted text
From: "Harry" <ebbrecords@...>
To: <Ensoniq-VFX-SD@yahoogroups.com>
Sent: Monday, October 25, 2004 8:19 PM
Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD


>
>
> Thank you for the response.
>
> I am looking for a way to copy a drum kit, mainly the Ballad-Kit
> because of the big toms, into a map that is compatible with GM so
> that I may use the Ensoniq drums (all of them in the kit) in
> sequences that I have written.
> I play in a band where I am the keyboardist, bassist and drummer; the
> majority of bass and all drums are done in the sequencer.  I
> currently use my Roland XP60 as the main sequencer.  I also use the
> sounds in it, including the drums.  I trigger an Alesis QS6, which is
> mainly on a preset(s) I have created that use drums and bass, to get
> a fuller drums and bass sound.
> I have the bass parts taken care of because they go to their
> respective channel from the XP60 and trigger anything on Channel 7.
> Since I have gotten my VFX-SD, I have fallen in love with the ballad
> kit again, and currently have a custom kit that uses the kick and
> snare from that kit.
> The problem is this:  I do not have the sequencer loaded in the VFX-
> SD, because the floppy drive does not work.  This forces me to use
> template for tracks 1-12 on the VFX-SD as my multi-timbral setup on
> that synth.  I do not anticipate getting the unit fixed until after
> the 1st of the year or when taxes come back, whichever allows for the
> funds to do so (I have my Christmas album from 2003 and my 2002
> release, Finding Hope, selling in stores in the area and online).
> Right now, I am writing music my another album and I am currently
> using track 10 for the drums (all the GM drums of course) and track
> 11 for the VFX alone.  Combining the kits make for a wonderful drum
> kit (especially on the toms and snare) and I would like to be able to
> do that in every song I do (for the cover band and/or for my own
> music), with the ballad kit and the other kits I trigger on my GM
> machines.
> I remember somewhere, probably in the Transoniq Hacker, where someone
> brought up the issue of GM kits on the VFX and SD-1 and I do not
> remember if it was answered.
>
> I hope that helps.  If there was a way that I could convert the data
> file to a file that can be read by my Roland XP60 or Yamaha MDF-II
> Data Filer, that would be great too.  My computer is set up for
> strictly computer and administrative duties, rather than MIDI.
>
> I downloaded the Geibler software to convert stuff to a format the
> VFX could read, but the program said my floppy drive was not
> compatible, so I gave up.
>
> I also got a hold of Thesoniq today and he did not give specific
> pricing on what it would cost to get my synth fixed, other than it
> was $70 for labor and $75 for the new floppy.  I am going to get the
> entire synth redone (new ROMs, updated O/S and whatever else I can do
> to make it new again), but again, that will be after the 1st of the
> year.
>
> I hope this explains it a little better.  I sure am happy that I got
> the VFX; I had been looking for one for many years and finally found
> one in the pawn shop for $250.00 .  Once I get it up and running 100%
> with the sequencer and other sounds accessible by floppy, I will be
> pleased.
>
> Thank you,
>
> Harry Ebbeson III
> Ebbeson Management Group
> www.geocities.com/ebbrecords
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Re: GM Drum Map for VFX-SD

2004-10-26 by Harry

Frank, 
  I will look at that tonight.  I have been going into the Wave Edit 
page, selecting which sound to work with, and changing the key range 
in the output screen.  I must have been doing it wrong.  The problem 
is that it seemed as though the ballad kit was a Multi-Drum sound and 
was permanently assigned to a range of keys that were not able to be 
changed.  I will look at your instruction tonight and let you know of 
my results.

Thank you, 

Harry Ebbeson III
Ebbeson Management Group
www.geocities.com/ebbrecords


--- In Ensoniq-VFX-SD@yahoogroups.com, "Frank Crawford" <fmc@t...> 
wrote:
> punch up the ballad kit, write down all the settings from edit drum 
map
> page, then select a drum kit in the int bank so you can save it, 
reproduce
> the settings you wrote down, in a gm map............frank
> ----- Original Message -----
> From: "Harry" <ebbrecords@y...>
> To: <Ensoniq-VFX-SD@yahoogroups.com>
> Sent: Monday, October 25, 2004 8:19 PM
> Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD
> 
> 
> >
> >
> > Thank you for the response.
> >
> > I am looking for a way to copy a drum kit, mainly the Ballad-Kit
> > because of the big toms, into a map that is compatible with GM so
> > that I may use the Ensoniq drums (all of them in the kit) in
> > sequences that I have written.
> > I play in a band where I am the keyboardist, bassist and drummer; 
the
> > majority of bass and all drums are done in the sequencer.  I
> > currently use my Roland XP60 as the main sequencer.  I also use 
the
> > sounds in it, including the drums.  I trigger an Alesis QS6, 
which is
> > mainly on a preset(s) I have created that use drums and bass, to 
get
> > a fuller drums and bass sound.
> > I have the bass parts taken care of because they go to their
> > respective channel from the XP60 and trigger anything on Channel 
7.
> > Since I have gotten my VFX-SD, I have fallen in love with the 
ballad
> > kit again, and currently have a custom kit that uses the kick and
> > snare from that kit.
> > The problem is this:  I do not have the sequencer loaded in the 
VFX-
> > SD, because the floppy drive does not work.  This forces me to use
> > template for tracks 1-12 on the VFX-SD as my multi-timbral setup 
on
> > that synth.  I do not anticipate getting the unit fixed until 
after
> > the 1st of the year or when taxes come back, whichever allows for 
the
> > funds to do so (I have my Christmas album from 2003 and my 2002
> > release, Finding Hope, selling in stores in the area and online).
> > Right now, I am writing music my another album and I am currently
> > using track 10 for the drums (all the GM drums of course) and 
track
> > 11 for the VFX alone.  Combining the kits make for a wonderful 
drum
> > kit (especially on the toms and snare) and I would like to be 
able to
> > do that in every song I do (for the cover band and/or for my own
> > music), with the ballad kit and the other kits I trigger on my GM
> > machines.
> > I remember somewhere, probably in the Transoniq Hacker, where 
someone
> > brought up the issue of GM kits on the VFX and SD-1 and I do not
> > remember if it was answered.
> >
> > I hope that helps.  If there was a way that I could convert the 
data
> > file to a file that can be read by my Roland XP60 or Yamaha MDF-II
> > Data Filer, that would be great too.  My computer is set up for
> > strictly computer and administrative duties, rather than MIDI.
> >
> > I downloaded the Geibler software to convert stuff to a format the
> > VFX could read, but the program said my floppy drive was not
> > compatible, so I gave up.
> >
> > I also got a hold of Thesoniq today and he did not give specific
> > pricing on what it would cost to get my synth fixed, other than it
> > was $70 for labor and $75 for the new floppy.  I am going to get 
the
> > entire synth redone (new ROMs, updated O/S and whatever else I 
can do
> > to make it new again), but again, that will be after the 1st of 
the
> > year.
> >
> > I hope this explains it a little better.  I sure am happy that I 
got
> > the VFX; I had been looking for one for many years and finally 
found
> > one in the pawn shop for $250.00 .  Once I get it up and running 
100%
> > with the sequencer and other sounds accessible by floppy, I will 
be
Show quoted textHide quoted text
> > pleased.
> >
> > Thank you,
> >
> > Harry Ebbeson III
> > Ebbeson Management Group
> > www.geocities.com/ebbrecords
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >

Re: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD

2004-10-27 by Laurent Prot

I don't know why but your messages
are incomming in my personnal mailbox?
bye.
Laurent Prot
Show quoted textHide quoted text
----- Original Message -----
From: Harry
Sent: Tuesday, October 26, 2004 5:02 PM
Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD


Frank,
I will look at that tonight. I have been going into the Wave Edit
page, selecting which sound to work with, and changing the key range
in the output screen. I must have been doing it wrong. The problem
is that it seemed as though the ballad kit was a Multi-Drum sound and
was permanently assigned to a range of keys that were not able to be
changed. I will look at your instruction tonight and let you know of
my results.

Thank you,

Harry Ebbeson III
Ebbeson Management Group
www.geocities.com/ebbrecords


--- In Ensoniq-VFX-SD@yahoogroups.com, "Frank Crawford"
wrote:
> punch up the ballad kit, write down all the settings from edit drum
map
> page, then select a drum kit in the int bank so you can save it,
reproduce
> the settings you wrote down, in a gm map............frank
> ----- Original Message -----
> From: "Harry"
> To:
> Sent: Monday, October 25, 2004 8:19 PM
> Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD
>
>
> >
> >
> > Thank you for the response.
> >
> > I am looking for a way to copy a drum kit, mainly the Ballad-Kit
> > because of the big toms, into a map that is compatible with GM so
> > that I may use the Ensoniq drums (all of them in the kit) in
> > sequences that I have written.
> > I play in a band where I am the keyboardist, bassist and drummer;
the
> > majority of bass and all drums are done in the sequencer. I
> > currently use my Roland XP60 as the main sequencer. I also use
the
> > sounds in it, including the drums. I trigger an Alesis QS6,
which is
> > mainly on a preset(s) I have created that use drums and bass, to
get
> > a fuller drums and bass sound.
> > I have the bass parts taken care of because they go to their
> > respective channel from the XP60 and trigger anything on Channel
7.
> > Since I have gotten my VFX-SD, I have fallen in love with the
ballad
> > kit again, and currently have a custom kit that uses the kick and
> > snare from that kit.
> > The problem is this: I do not have the sequencer loaded in the
VFX-
> > SD, because the floppy drive does not work. This forces me to use
> > template for tracks 1-12 on the VFX-SD as my multi-timbral setup
on
> > that synth. I do not anticipate getting the unit fixed until
after
> > the 1st of the year or when taxes come back, whichever allows for
the
> > funds to do so (I have my Christmas album from 2003 and my 2002
> > release, Finding Hope, selling in stores in the area and online).
> > Right now, I am writing music my another album and I am currently
> > using track 10 for the drums (all the GM drums of course) and
track
> > 11 for the VFX alone. Combining the kits make for a wonderful
drum
> > kit (especially on the toms and snare) and I would like to be
able to
> > do that in every song I do (for the cover band and/or for my own
> > music), with the ballad kit and the other kits I trigger on my GM
> >; machines.
> > I remember somewhere, probably in the Transoniq Hacker, where
someone
> > brought up the issue of GM kits on the VFX and SD-1 and I do not
> > remember if it was answered.
> >
> > I hope that helps. If there was a way that I could convert the
data
> > file to a file that can be read by my Roland XP60 or Yamaha MDF-II
> > Data Filer, that would be great too. My computer is set up for
> > strictly computer and administrative duties, rather than MIDI.
> >
> > I downloaded the Geibler software to convert stuff to a format the
> > VFX could read, but the program said my floppy drive was not
> > compatible, so I gave up.
> >
> > I also got a hold of Thesoniq today and he did not give specific
>; > pricing on what it would cost to get my synth fixed, other than it
> > was $70 for labor and $75 for the new floppy. I am going to get
the
> > entire synth redone (new ROMs, updated O/S and whatever else I
can do
> > to make it new again), but again, that will be after the 1st of
the
> > year.
> >
> > I hope this explains it a little better. I sure am happy that I
got
> > the VFX; I had been looking for one for many years and finally
found
> > one in the pawn shop for $250.00 . Once I get it up and running
100%
> > with the sequencer and other sounds accessible by floppy, I will
be
> > pleased.
> >
> > Thank you,
> >
> > Harry Ebbeson III
> > Ebbeson Management Group
> > www.geocities.com/ebbrecords
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >




Re: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD

2004-10-27 by Frank Crawford

who did you send the message to about personal mail box?................frank or harry?
Show quoted textHide quoted text
----- Original Message -----
Sent: Wednesday, October 27, 2004 6:34 AM
Subject: Re: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD

I don't know why but your messages
are incomming in my personnal mailbox?
;
bye.
Laurent Prot
----- Original Message -----
From: Harry
Sent: Tuesday, October 26, 2004 5:02 PM
Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD


Frank,
I will look at that tonight. I have been going into the Wave Edit
page, selecting which sound to work with, and changing the key range
in the output screen. I must have been doing it wrong. The problem
is that it seemed as though the ballad kit was a Multi-Drum sound and
was permanently assigned to a range of keys that were not able to be
changed. I will look at your instruction tonight and let you know of
my results.

Thank you,

Harry Ebbeson III
Ebbeson Management Group
www.geocities.com/ebbrecords


--- In Ensoniq-VFX-SD@yahoogroups.com, "Frank Crawford"
wrote:
> punch up the ballad kit, write down all the settings from edit drum
map
> page, then select a drum kit in the int bank so you can save it,
reproduce
> the settings you wrote down, in a gm map............frank
> ----- Original Message -----
> From: "Harry"
> To:
> Sent: Monday, October 25, 2004 8:19 PM
>; Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD
>
>;
> >
> >
> > Thank you for the response.
> >
> > I am looking for a way to copy a drum kit, mainly the Ballad-Kit
> > because of the big toms, into a map that is compatible with GM so
> > that I may use the Ensoniq drums (all of them in the kit) in
> > sequences that I have written.
> > I play in a band where I am the keyboardist, bassist and drummer;
the
> > majority of bass and all drums are done in the sequencer. I
> > currently use my Roland XP60 as the main sequencer. I also use
the
> > sounds in it, including the drums. I trigger an Alesis QS6,
which is
> > mainly on a preset(s) I have created that use drums and bass, to
get
> > a fuller drums and bass sound.
> > I have the bass parts taken care of because they go to their
> > respective channel from the XP60 and trigger anything on Channel
7.
> > Since I have gotten my VFX-SD, I have fallen in love with the
ballad
> > kit again, and currently have a custom kit that uses the kick and
> > snare from that kit.
> > The problem is this: I do not have the sequencer loaded in the
VFX-
> > SD, because the floppy drive does not work. This forces me to use
> > template for tracks 1-12 on the VFX-SD as my multi-timbral setup
on
> > that synth. I do not anticipate getting the unit fixed until
after
> > the 1st of the year or when taxes come back, whichever allows for
the
> > funds to do so (I have my Christmas album from 2003 and my 2002
> > release, Finding Hope, selling in stores in the area and online).
> > Right now, I am writing music my another album and I am currently
> > using track 10 for the drums (all the GM drums of course) and
track
> > 11 for the VFX alone. Combining the kits make for a wonderful
drum
> > kit (especially on the toms and snare) and I would like to be
able to
> > do that in every song I do (for the cover band and/or for my own
> > music), with the ballad kit and the other kits I trigger on my GM
> > machines.
> >; I remember somewhere, probably in the Transoniq Hacker, where
someone
> > brought up the issue of GM kits on the VFX and SD-1 and I do not
> > remember if it was answered.
> >
> > I hope that helps. If there was a way that I could convert the
data
> > file to a file that can be read by my Roland XP60 or Yamaha MDF-II
> > Data Filer, that would be great too. My computer is set up for
> > strictly computer and administrative duties, rather than MIDI.
> >
> > I downloaded the Geibler software to convert stuff to a format the
> > VFX could read, but the program said my floppy drive was not
> > compatible, so I gave up.
> >
> > I also got a hold of Thesoniq today and he did not give specific
> > pricing on what it would cost to get my synth fixed, other than it
> > was $70 for labor and $75 for the new floppy. I am going to get
the
> > entire synth redone (new ROMs, updated O/S and whatever else I
can do
> > to make it new again), but again, that will be after the 1st of
the
> > year.
> >
> > I hope this explains it a little better. I sure am happy that I
got
> > the VFX; I had been looking for one for many years and finally
found
> > one in the pawn shop for $250.00 . Once I get it up and running
100%
> > with the sequencer and other sounds accessible by floppy, I will
be
> > pleased.
> >
> > Thank you,
> >
> > Harry Ebbeson III
> > Ebbeson Management Group
> > www.geocities.com/ebbrecords
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >;
> >





Re: GM Drum Map for VFX-SD

2004-10-27 by Harry

Laurent, 
  I am not aware of sending any mail to you at any time that I have 
been sending e-mail.  I do not recognize your address and if you are 
getting e-mails, then possibly you are set up to get e-mails from 
this board or something.  
  There is also the possibility that someone has spoofed my address 
and sending stuff around.  It seems to happen quite a bit nowadays.

Frank, I did not have the chance to try out the drum thing yet, but 
plan on doing that tonight.  I will keep you posted on my progress.

Thank you, 

Harry Ebbeson III
Ebbeson Management Group
www.geocities.com/ebbrecords

Re: GM Drum Map for VFX-SD

2004-10-28 by Harry

Frank, 
  I am looking for the drum map page that you are talking about and 
cannot readily find it.  Are you speaking of the Output screen where 
it is showing the key assignment for each sound?

I am a little lost on that part of it all.  Fan you give me more 
insight as to which screen you are talking about?

Thank you, 

Harry Ebbeson III


--- In Ensoniq-VFX-SD@yahoogroups.com, "Harry" <ebbrecords@y...> 
wrote:
> 
> Frank, 
>   I will look at that tonight.  I have been going into the Wave 
Edit 
> page, selecting which sound to work with, and changing the key 
range 
> in the output screen.  I must have been doing it wrong.  The 
problem 
> is that it seemed as though the ballad kit was a Multi-Drum sound 
and 
> was permanently assigned to a range of keys that were not able to 
be 
> changed.  I will look at your instruction tonight and let you know 
of 
> my results.
> 
> Thank you, 
> 
> Harry Ebbeson III
> Ebbeson Management Group
> www.geocities.com/ebbrecords
> 
> 
> --- In Ensoniq-VFX-SD@yahoogroups.com, "Frank Crawford" <fmc@t...> 
> wrote:
> > punch up the ballad kit, write down all the settings from edit 
drum 
> map
> > page, then select a drum kit in the int bank so you can save it, 
> reproduce
> > the settings you wrote down, in a gm map............frank
> > ----- Original Message -----
> > From: "Harry" <ebbrecords@y...>
> > To: <Ensoniq-VFX-SD@yahoogroups.com>
> > Sent: Monday, October 25, 2004 8:19 PM
> > Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD
> > 
> > 
> > >
> > >
> > > Thank you for the response.
> > >
> > > I am looking for a way to copy a drum kit, mainly the Ballad-Kit
> > > because of the big toms, into a map that is compatible with GM 
so
> > > that I may use the Ensoniq drums (all of them in the kit) in
> > > sequences that I have written.
> > > I play in a band where I am the keyboardist, bassist and 
drummer; 
> the
> > > majority of bass and all drums are done in the sequencer.  I
> > > currently use my Roland XP60 as the main sequencer.  I also use 
> the
> > > sounds in it, including the drums.  I trigger an Alesis QS6, 
> which is
> > > mainly on a preset(s) I have created that use drums and bass, 
to 
> get
> > > a fuller drums and bass sound.
> > > I have the bass parts taken care of because they go to their
> > > respective channel from the XP60 and trigger anything on 
Channel 
> 7.
> > > Since I have gotten my VFX-SD, I have fallen in love with the 
> ballad
> > > kit again, and currently have a custom kit that uses the kick 
and
> > > snare from that kit.
> > > The problem is this:  I do not have the sequencer loaded in the 
> VFX-
> > > SD, because the floppy drive does not work.  This forces me to 
use
> > > template for tracks 1-12 on the VFX-SD as my multi-timbral 
setup 
> on
> > > that synth.  I do not anticipate getting the unit fixed until 
> after
> > > the 1st of the year or when taxes come back, whichever allows 
for 
> the
> > > funds to do so (I have my Christmas album from 2003 and my 2002
> > > release, Finding Hope, selling in stores in the area and 
online).
> > > Right now, I am writing music my another album and I am 
currently
> > > using track 10 for the drums (all the GM drums of course) and 
> track
> > > 11 for the VFX alone.  Combining the kits make for a wonderful 
> drum
> > > kit (especially on the toms and snare) and I would like to be 
> able to
> > > do that in every song I do (for the cover band and/or for my own
> > > music), with the ballad kit and the other kits I trigger on my 
GM
> > > machines.
> > > I remember somewhere, probably in the Transoniq Hacker, where 
> someone
> > > brought up the issue of GM kits on the VFX and SD-1 and I do not
> > > remember if it was answered.
> > >
> > > I hope that helps.  If there was a way that I could convert the 
> data
> > > file to a file that can be read by my Roland XP60 or Yamaha MDF-
II
> > > Data Filer, that would be great too.  My computer is set up for
> > > strictly computer and administrative duties, rather than MIDI.
> > >
> > > I downloaded the Geibler software to convert stuff to a format 
the
> > > VFX could read, but the program said my floppy drive was not
> > > compatible, so I gave up.
> > >
> > > I also got a hold of Thesoniq today and he did not give specific
> > > pricing on what it would cost to get my synth fixed, other than 
it
> > > was $70 for labor and $75 for the new floppy.  I am going to 
get 
> the
> > > entire synth redone (new ROMs, updated O/S and whatever else I 
> can do
> > > to make it new again), but again, that will be after the 1st of 
> the
> > > year.
> > >
> > > I hope this explains it a little better.  I sure am happy that 
I 
> got
> > > the VFX; I had been looking for one for many years and finally 
> found
> > > one in the pawn shop for $250.00 .  Once I get it up and 
running 
> 100%
> > > with the sequencer and other sounds accessible by floppy, I 
will
Show quoted textHide quoted text
> be
> > > pleased.
> > >
> > > Thank you,
> > >
> > > Harry Ebbeson III
> > > Ebbeson Management Group
> > > www.geocities.com/ebbrecords
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >

Re: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD

2004-10-28 by Frank Crawford

are you doing a vfx-sd or an SD-1 ?


----- Original Message -----
Show quoted textHide quoted text
From: "Harry" <ebbrecords@...>
To: <Ensoniq-VFX-SD@yahoogroups.com>
Sent: Wednesday, October 27, 2004 8:14 PM
Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD


> 
> 
> Frank, 
>   I am looking for the drum map page that you are talking about and 
> cannot readily find it.  Are you speaking of the Output screen where 
> it is showing the key assignment for each sound?
> 
> I am a little lost on that part of it all.  Fan you give me more 
> insight as to which screen you are talking about?
> 
> Thank you, 
> 
> Harry Ebbeson III
> 
> 
> --- In Ensoniq-VFX-SD@yahoogroups.com, "Harry" <ebbrecords@y...> 
> wrote:
> > 
> > Frank, 
> >   I will look at that tonight.  I have been going into the Wave 
> Edit 
> > page, selecting which sound to work with, and changing the key 
> range 
> > in the output screen.  I must have been doing it wrong.  The 
> problem 
> > is that it seemed as though the ballad kit was a Multi-Drum sound 
> and 
> > was permanently assigned to a range of keys that were not able to 
> be 
> > changed.  I will look at your instruction tonight and let you know 
> of 
> > my results.
> > 
> > Thank you, 
> > 
> > Harry Ebbeson III
> > Ebbeson Management Group
> > www.geocities.com/ebbrecords
> > 
> > 
> > --- In Ensoniq-VFX-SD@yahoogroups.com, "Frank Crawford" <fmc@t...> 
> > wrote:
> > > punch up the ballad kit, write down all the settings from edit 
> drum 
> > map
> > > page, then select a drum kit in the int bank so you can save it, 
> > reproduce
> > > the settings you wrote down, in a gm map............frank
> > > ----- Original Message -----
> > > From: "Harry" <ebbrecords@y...>
> > > To: <Ensoniq-VFX-SD@yahoogroups.com>
> > > Sent: Monday, October 25, 2004 8:19 PM
> > > Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD
> > > 
> > > 
> > > >
> > > >
> > > > Thank you for the response.
> > > >
> > > > I am looking for a way to copy a drum kit, mainly the Ballad-Kit
> > > > because of the big toms, into a map that is compatible with GM 
> so
> > > > that I may use the Ensoniq drums (all of them in the kit) in
> > > > sequences that I have written.
> > > > I play in a band where I am the keyboardist, bassist and 
> drummer; 
> > the
> > > > majority of bass and all drums are done in the sequencer.  I
> > > > currently use my Roland XP60 as the main sequencer.  I also use 
> > the
> > > > sounds in it, including the drums.  I trigger an Alesis QS6, 
> > which is
> > > > mainly on a preset(s) I have created that use drums and bass, 
> to 
> > get
> > > > a fuller drums and bass sound.
> > > > I have the bass parts taken care of because they go to their
> > > > respective channel from the XP60 and trigger anything on 
> Channel 
> > 7.
> > > > Since I have gotten my VFX-SD, I have fallen in love with the 
> > ballad
> > > > kit again, and currently have a custom kit that uses the kick 
> and
> > > > snare from that kit.
> > > > The problem is this:  I do not have the sequencer loaded in the 
> > VFX-
> > > > SD, because the floppy drive does not work.  This forces me to 
> use
> > > > template for tracks 1-12 on the VFX-SD as my multi-timbral 
> setup 
> > on
> > > > that synth.  I do not anticipate getting the unit fixed until 
> > after
> > > > the 1st of the year or when taxes come back, whichever allows 
> for 
> > the
> > > > funds to do so (I have my Christmas album from 2003 and my 2002
> > > > release, Finding Hope, selling in stores in the area and 
> online).
> > > > Right now, I am writing music my another album and I am 
> currently
> > > > using track 10 for the drums (all the GM drums of course) and 
> > track
> > > > 11 for the VFX alone.  Combining the kits make for a wonderful 
> > drum
> > > > kit (especially on the toms and snare) and I would like to be 
> > able to
> > > > do that in every song I do (for the cover band and/or for my own
> > > > music), with the ballad kit and the other kits I trigger on my 
> GM
> > > > machines.
> > > > I remember somewhere, probably in the Transoniq Hacker, where 
> > someone
> > > > brought up the issue of GM kits on the VFX and SD-1 and I do not
> > > > remember if it was answered.
> > > >
> > > > I hope that helps.  If there was a way that I could convert the 
> > data
> > > > file to a file that can be read by my Roland XP60 or Yamaha MDF-
> II
> > > > Data Filer, that would be great too.  My computer is set up for
> > > > strictly computer and administrative duties, rather than MIDI.
> > > >
> > > > I downloaded the Geibler software to convert stuff to a format 
> the
> > > > VFX could read, but the program said my floppy drive was not
> > > > compatible, so I gave up.
> > > >
> > > > I also got a hold of Thesoniq today and he did not give specific
> > > > pricing on what it would cost to get my synth fixed, other than 
> it
> > > > was $70 for labor and $75 for the new floppy.  I am going to 
> get 
> > the
> > > > entire synth redone (new ROMs, updated O/S and whatever else I 
> > can do
> > > > to make it new again), but again, that will be after the 1st of 
> > the
> > > > year.
> > > >
> > > > I hope this explains it a little better.  I sure am happy that 
> I 
> > got
> > > > the VFX; I had been looking for one for many years and finally 
> > found
> > > > one in the pawn shop for $250.00 .  Once I get it up and 
> running 
> > 100%
> > > > with the sequencer and other sounds accessible by floppy, I 
> will 
> > be
> > > > pleased.
> > > >
> > > > Thank you,
> > > >
> > > > Harry Ebbeson III
> > > > Ebbeson Management Group
> > > > www.geocities.com/ebbrecords
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
>

Re: GM Drum Map for VFX-SD

2004-10-28 by Harry

Frank, 

  I have a VFX-SD.

Thank you, 

Harry Ebbeson III

--- In Ensoniq-VFX-SD@yahoogroups.com, "Frank Crawford" <fmc@t...> 
wrote:
> are you doing a vfx-sd or an SD-1 ?
> 
> 
> ----- Original Message ----- 
> From: "Harry" <ebbrecords@y...>
> To: <Ensoniq-VFX-SD@yahoogroups.com>
> Sent: Wednesday, October 27, 2004 8:14 PM
> Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD
> 
> 
> > 
> > 
> > Frank, 
> >   I am looking for the drum map page that you are talking about 
and 
> > cannot readily find it.  Are you speaking of the Output screen 
where 
> > it is showing the key assignment for each sound?
> > 
> > I am a little lost on that part of it all.  Fan you give me more 
> > insight as to which screen you are talking about?
> > 
> > Thank you, 
> > 
> > Harry Ebbeson III
> > 
> > 
> > --- In Ensoniq-VFX-SD@yahoogroups.com, "Harry" <ebbrecords@y...> 
> > wrote:
> > > 
> > > Frank, 
> > >   I will look at that tonight.  I have been going into the Wave 
> > Edit 
> > > page, selecting which sound to work with, and changing the key 
> > range 
> > > in the output screen.  I must have been doing it wrong.  The 
> > problem 
> > > is that it seemed as though the ballad kit was a Multi-Drum 
sound 
> > and 
> > > was permanently assigned to a range of keys that were not able 
to 
> > be 
> > > changed.  I will look at your instruction tonight and let you 
know 
> > of 
> > > my results.
> > > 
> > > Thank you, 
> > > 
> > > Harry Ebbeson III
> > > Ebbeson Management Group
> > > www.geocities.com/ebbrecords
> > > 
> > > 
> > > --- In Ensoniq-VFX-SD@yahoogroups.com, "Frank Crawford" 
<fmc@t...> 
> > > wrote:
> > > > punch up the ballad kit, write down all the settings from 
edit 
> > drum 
> > > map
> > > > page, then select a drum kit in the int bank so you can save 
it, 
> > > reproduce
> > > > the settings you wrote down, in a gm map............frank
> > > > ----- Original Message -----
> > > > From: "Harry" <ebbrecords@y...>
> > > > To: <Ensoniq-VFX-SD@yahoogroups.com>
> > > > Sent: Monday, October 25, 2004 8:19 PM
> > > > Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD
> > > > 
> > > > 
> > > > >
> > > > >
> > > > > Thank you for the response.
> > > > >
> > > > > I am looking for a way to copy a drum kit, mainly the 
Ballad-Kit
> > > > > because of the big toms, into a map that is compatible with 
GM 
> > so
> > > > > that I may use the Ensoniq drums (all of them in the kit) in
> > > > > sequences that I have written.
> > > > > I play in a band where I am the keyboardist, bassist and 
> > drummer; 
> > > the
> > > > > majority of bass and all drums are done in the sequencer.  I
> > > > > currently use my Roland XP60 as the main sequencer.  I also 
use 
> > > the
> > > > > sounds in it, including the drums.  I trigger an Alesis 
QS6, 
> > > which is
> > > > > mainly on a preset(s) I have created that use drums and 
bass, 
> > to 
> > > get
> > > > > a fuller drums and bass sound.
> > > > > I have the bass parts taken care of because they go to their
> > > > > respective channel from the XP60 and trigger anything on 
> > Channel 
> > > 7.
> > > > > Since I have gotten my VFX-SD, I have fallen in love with 
the 
> > > ballad
> > > > > kit again, and currently have a custom kit that uses the 
kick 
> > and
> > > > > snare from that kit.
> > > > > The problem is this:  I do not have the sequencer loaded in 
the 
> > > VFX-
> > > > > SD, because the floppy drive does not work.  This forces me 
to 
> > use
> > > > > template for tracks 1-12 on the VFX-SD as my multi-timbral 
> > setup 
> > > on
> > > > > that synth.  I do not anticipate getting the unit fixed 
until 
> > > after
> > > > > the 1st of the year or when taxes come back, whichever 
allows 
> > for 
> > > the
> > > > > funds to do so (I have my Christmas album from 2003 and my 
2002
> > > > > release, Finding Hope, selling in stores in the area and 
> > online).
> > > > > Right now, I am writing music my another album and I am 
> > currently
> > > > > using track 10 for the drums (all the GM drums of course) 
and 
> > > track
> > > > > 11 for the VFX alone.  Combining the kits make for a 
wonderful 
> > > drum
> > > > > kit (especially on the toms and snare) and I would like to 
be 
> > > able to
> > > > > do that in every song I do (for the cover band and/or for 
my own
> > > > > music), with the ballad kit and the other kits I trigger on 
my 
> > GM
> > > > > machines.
> > > > > I remember somewhere, probably in the Transoniq Hacker, 
where 
> > > someone
> > > > > brought up the issue of GM kits on the VFX and SD-1 and I 
do not
> > > > > remember if it was answered.
> > > > >
> > > > > I hope that helps.  If there was a way that I could convert 
the 
> > > data
> > > > > file to a file that can be read by my Roland XP60 or Yamaha 
MDF-
> > II
> > > > > Data Filer, that would be great too.  My computer is set up 
for
> > > > > strictly computer and administrative duties, rather than 
MIDI.
> > > > >
> > > > > I downloaded the Geibler software to convert stuff to a 
format 
> > the
> > > > > VFX could read, but the program said my floppy drive was not
> > > > > compatible, so I gave up.
> > > > >
> > > > > I also got a hold of Thesoniq today and he did not give 
specific
> > > > > pricing on what it would cost to get my synth fixed, other 
than 
> > it
> > > > > was $70 for labor and $75 for the new floppy.  I am going 
to 
> > get 
> > > the
> > > > > entire synth redone (new ROMs, updated O/S and whatever 
else I 
> > > can do
> > > > > to make it new again), but again, that will be after the 
1st of 
> > > the
> > > > > year.
> > > > >
> > > > > I hope this explains it a little better.  I sure am happy 
that 
> > I 
> > > got
> > > > > the VFX; I had been looking for one for many years and 
finally
Show quoted textHide quoted text
> > > found
> > > > > one in the pawn shop for $250.00 .  Once I get it up and 
> > running 
> > > 100%
> > > > > with the sequencer and other sounds accessible by floppy, I 
> > will 
> > > be
> > > > > pleased.
> > > > >
> > > > > Thank you,
> > > > >
> > > > > Harry Ebbeson III
> > > > > Ebbeson Management Group
> > > > > www.geocities.com/ebbrecords
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > 
> > 
> > 
> > 
> > 
> > 
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> > 
> >

Re: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD

2004-10-28 by Frank Crawford

I am using the SD-1.  Maybe thats the problem.  When I get home tonight, Ill
go thru it step by step & send it.
Show quoted textHide quoted text
> From: Harry <ebbrecords@...>
> Reply-To: Ensoniq-VFX-SD@yahoogroups.com
> Date: Thu, 28 Oct 2004 01:55:51 +0000
> To: Ensoniq-VFX-SD@yahoogroups.com
> Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD
> 
> 
> 
> Frank, 
> 
> I have a VFX-SD.
> 
> Thank you, 
> 
> Harry Ebbeson III
> 
> --- In Ensoniq-VFX-SD@yahoogroups.com, "Frank Crawford" <fmc@t...>
> wrote:
>> are you doing a vfx-sd or an SD-1 ?
>> 
>> 
>> ----- Original Message -----
>> From: "Harry" <ebbrecords@y...>
>> To: <Ensoniq-VFX-SD@yahoogroups.com>
>> Sent: Wednesday, October 27, 2004 8:14 PM
>> Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD
>> 
>> 
>>> 
>>> 
>>> Frank, 
>>> I am looking for the drum map page that you are talking about
> and 
>>> cannot readily find it.  Are you speaking of the Output screen
> where 
>>> it is showing the key assignment for each sound?
>>> 
>>> I am a little lost on that part of it all.  Fan you give me more
>>> insight as to which screen you are talking about?
>>> 
>>> Thank you, 
>>> 
>>> Harry Ebbeson III
>>> 
>>> 
>>> --- In Ensoniq-VFX-SD@yahoogroups.com, "Harry" <ebbrecords@y...>
>>> wrote:
>>>> 
>>>> Frank, 
>>>> I will look at that tonight.  I have been going into the Wave
>>> Edit 
>>>> page, selecting which sound to work with, and changing the key
>>> range 
>>>> in the output screen.  I must have been doing it wrong.  The
>>> problem 
>>>> is that it seemed as though the ballad kit was a Multi-Drum
> sound 
>>> and 
>>>> was permanently assigned to a range of keys that were not able
> to 
>>> be 
>>>> changed.  I will look at your instruction tonight and let you
> know 
>>> of 
>>>> my results.
>>>> 
>>>> Thank you, 
>>>> 
>>>> Harry Ebbeson III
>>>> Ebbeson Management Group
>>>> www.geocities.com/ebbrecords
>>>> 
>>>> 
>>>> --- In Ensoniq-VFX-SD@yahoogroups.com, "Frank Crawford"
> <fmc@t...> 
>>>> wrote:
>>>>> punch up the ballad kit, write down all the settings from
> edit 
>>> drum 
>>>> map
>>>>> page, then select a drum kit in the int bank so you can save
> it, 
>>>> reproduce
>>>>> the settings you wrote down, in a gm map............frank
>>>>> ----- Original Message -----
>>>>> From: "Harry" <ebbrecords@y...>
>>>>> To: <Ensoniq-VFX-SD@yahoogroups.com>
>>>>> Sent: Monday, October 25, 2004 8:19 PM
>>>>> Subject: [Ensoniq-VFX-SD] Re: GM Drum Map for VFX-SD
>>>>> 
>>>>> 
>>>>>> 
>>>>>> 
>>>>>> Thank you for the response.
>>>>>> 
>>>>>> I am looking for a way to copy a drum kit, mainly the
> Ballad-Kit
>>>>>> because of the big toms, into a map that is compatible with
> GM 
>>> so
>>>>>> that I may use the Ensoniq drums (all of them in the kit) in
>>>>>> sequences that I have written.
>>>>>> I play in a band where I am the keyboardist, bassist and
>>> drummer; 
>>>> the
>>>>>> majority of bass and all drums are done in the sequencer.  I
>>>>>> currently use my Roland XP60 as the main sequencer.  I also
> use 
>>>> the
>>>>>> sounds in it, including the drums.  I trigger an Alesis
> QS6, 
>>>> which is
>>>>>> mainly on a preset(s) I have created that use drums and
> bass, 
>>> to 
>>>> get
>>>>>> a fuller drums and bass sound.
>>>>>> I have the bass parts taken care of because they go to their
>>>>>> respective channel from the XP60 and trigger anything on
>>> Channel 
>>>> 7.
>>>>>> Since I have gotten my VFX-SD, I have fallen in love with
> the 
>>>> ballad
>>>>>> kit again, and currently have a custom kit that uses the
> kick 
>>> and
>>>>>> snare from that kit.
>>>>>> The problem is this:  I do not have the sequencer loaded in
> the 
>>>> VFX-
>>>>>> SD, because the floppy drive does not work.  This forces me
> to 
>>> use
>>>>>> template for tracks 1-12 on the VFX-SD as my multi-timbral
>>> setup 
>>>> on
>>>>>> that synth.  I do not anticipate getting the unit fixed
> until 
>>>> after
>>>>>> the 1st of the year or when taxes come back, whichever
> allows 
>>> for 
>>>> the
>>>>>> funds to do so (I have my Christmas album from 2003 and my
> 2002
>>>>>> release, Finding Hope, selling in stores in the area and
>>> online).
>>>>>> Right now, I am writing music my another album and I am
>>> currently
>>>>>> using track 10 for the drums (all the GM drums of course)
> and 
>>>> track
>>>>>> 11 for the VFX alone.  Combining the kits make for a
> wonderful 
>>>> drum
>>>>>> kit (especially on the toms and snare) and I would like to
> be 
>>>> able to
>>>>>> do that in every song I do (for the cover band and/or for
> my own
>>>>>> music), with the ballad kit and the other kits I trigger on
> my 
>>> GM
>>>>>> machines.
>>>>>> I remember somewhere, probably in the Transoniq Hacker,
> where 
>>>> someone
>>>>>> brought up the issue of GM kits on the VFX and SD-1 and I
> do not
>>>>>> remember if it was answered.
>>>>>> 
>>>>>> I hope that helps.  If there was a way that I could convert
> the 
>>>> data
>>>>>> file to a file that can be read by my Roland XP60 or Yamaha
> MDF-
>>> II
>>>>>> Data Filer, that would be great too.  My computer is set up
> for
>>>>>> strictly computer and administrative duties, rather than
> MIDI.
>>>>>> 
>>>>>> I downloaded the Geibler software to convert stuff to a
> format 
>>> the
>>>>>> VFX could read, but the program said my floppy drive was not
>>>>>> compatible, so I gave up.
>>>>>> 
>>>>>> I also got a hold of Thesoniq today and he did not give
> specific
>>>>>> pricing on what it would cost to get my synth fixed, other
> than 
>>> it
>>>>>> was $70 for labor and $75 for the new floppy.  I am going
> to 
>>> get 
>>>> the
>>>>>> entire synth redone (new ROMs, updated O/S and whatever
> else I 
>>>> can do
>>>>>> to make it new again), but again, that will be after the
> 1st of 
>>>> the
>>>>>> year.
>>>>>> 
>>>>>> I hope this explains it a little better.  I sure am happy
> that 
>>> I 
>>>> got
>>>>>> the VFX; I had been looking for one for many years and
> finally 
>>>> found
>>>>>> one in the pawn shop for $250.00 .  Once I get it up and
>>> running 
>>>> 100%
>>>>>> with the sequencer and other sounds accessible by floppy, I
>>> will 
>>>> be
>>>>>> pleased.
>>>>>> 
>>>>>> Thank you,
>>>>>> 
>>>>>> Harry Ebbeson III
>>>>>> Ebbeson Management Group
>>>>>> www.geocities.com/ebbrecords
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> Yahoo! Groups Links
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Yahoo! Groups Links
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
> 
> 
> 
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.