Patches and discussion for Ensoniq VFX family

Reg Took your advise.  Here's the new post.

My sequencer went down on my SD-1 32 voice.  The read out 
says "Sequencer Must Be Loaded."  

It takes floppies to load programs.  Of course the only floppy I 
don't have is the sequencer sofware.  

Anyone have any idea if there is a download somewhere to 
reload the sequencer?  

I really hate that I lost my sequences that I worked so hard on.
(Back up  Back up  Back up!)

Thanks.

Jay

see my latest post 
Hans

----- Original Message ----- 
From: "Jay Barnes" <apdced34@...>
To: <Ensoniq-VFX-SD@yahoogroups.com>
Sent: Sunday, January 02, 2005 4:49 PM
Subject: [Ensoniq-VFX-SD] SD-1 sequencer software




Reg Took your advise.  Here's the new post.

My sequencer went down on my SD-1 32 voice.  The read out 
says "Sequencer Must Be Loaded."  

It takes floppies to load programs.  Of course the only floppy I 
don't have is the sequencer sofware. 

Anyone have any idea if there is a download somewhere to 
reload the sequencer? 

I really hate that I lost my sequences that I worked so hard on.
(Back up  Back up  Back up!)

Thanks.

Jay






 
Yahoo! Groups Links

Alan,
I appreciate that.  In looking at that site I'm not
seeing anything sequencer specific.  Should I assume
that the sequencer program is contained in the 4.10
disc?  If that's the case it would appear that the
disc I have isn't any good.  Floppies do tend to go
bad.  When I load the 4.10 disk and do the load
command it does nothing.  I bought my SD1 used a
couple of years ago and there's no telling how old the
disks are or how they were stored by the, at least 2
previous owners.  I can't stand not having my keyboard
operating.  I do all my drums on it as a group of
sequences as well as piano and organ.
Jay 


> Jay,
> 
> Hans has forwarded you information for your
> sequencer operation. Hopefully that will help you
> out.
> 
> In addition to his help, my SD-1 sequencer operating
> system is Version 4.10 and requires ROM operating
> system 4.0 or higher. If worse comes to worse, I
> would be happy to mail you a copy of my O. S. disk.
> Let me know and I will email you at your personal
> email address and get your address.
> 
> Alan
>   ----- Original Message ----- 
>   From: Jay Barnes 
>   To: Ensoniq-VFX-SD@yahoogroups.com 
>   Sent: Sunday, January 02, 2005 9:49 AM
>   Subject: [Ensoniq-VFX-SD] SD-1 sequencer software
> 
> 
> 
>   Reg Took your advise.  Here's the new post.
> 
>   My sequencer went down on my SD-1 32 voice.  The
> read out 
>   says "Sequencer Must Be Loaded."  
> 
>   It takes floppies to load programs.  Of course the
> only floppy I 
>   don't have is the sequencer sofware.  
> 
>   Anyone have any idea if there is a download
> somewhere to 
>   reload the sequencer?  
> 
>   I really hate that I lost my sequences that I
> worked so hard on.
>   (Back up  Back up  Back up!)
> 
>   Thanks.
> 
>   Jay
> 
> 
> 
> 
> 
> 
>
------------------------------------------------------------------------------
>   Yahoo! Groups Links
> 
>     a.. To visit your group on the web, go to:
>     http://groups.yahoo.com/group/Ensoniq-VFX-SD/
>       
>     b.. To unsubscribe from this group, send an
> email to:
>     Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
>       
>     c.. Your use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service. 
> 
> 



		
__________________________________ 
Do you Yahoo!? 
Meet the all-new My Yahoo! - Try it today! 
http://my.yahoo.com

All in all,,,,rather confusing.  Reminds me of a
school I went to called Basic Data Recovery.  I left
there drooling due to brain shut  down.  Actually the
disk I was referring to was one I got with the SD1 but
I haven't checked it to see if it's a double sided or
not.  It doesn't appear to be the original.  I'll
check it out.  I can see right now that I'm not going
to have my beloved keyboard up and running in the next
couple days.  At least the other funtion's working and
I can still at least play it even if I can't do my
sequences.  Thanks.
Jay

> Hans will be able to explain the situation with
> downloading those files from "emu.com" far, far
> better than I can. I have never used those files
> provided by that website so I am not an expert but I
> think you must first install the Giebler EDE
> software Hans referred to which actually converts
> the downloaded 4.10 operating system you are
> referring to into something the SD1 can read. Also,
> if you are not aware, the SD1 disk drive reads only
> "Double-Density" floppies and will not read the
> standard type floppy you use in your desktop
> computer. So if you have downloaded the Version 4.10
> file from the site referred to by Hans and then
> tried to use that disk in the SD1 - the SD1 will
> indeed just sit there staring back at you.
> 
> But again, I am aware of the procedure Hans has
> mentioned and referred you to but know little or
> nothing about the specifics since I have personally
> never used it. Sorry.......
> 
> Alan
>   ----- Original Message ----- 
>   From: Jay Barnes 
>   To: Ensoniq-VFX-SD@yahoogroups.com 
>   Sent: Sunday, January 02, 2005 12:15 PM
>   Subject: Re: [Ensoniq-VFX-SD] SD-1 sequencer
> software
> 
> 
>   Alan,
>   I appreciate that.  In looking at that site I'm
> not
>   seeing anything sequencer specific.  Should I
> assume
>   that the sequencer program is contained in the
> 4.10
>   disc?  If that's the case it would appear that the
>   disc I have isn't any good.  Floppies do tend to
> go
>   bad.  When I load the 4.10 disk and do the load
>   command it does nothing.  I bought my SD1 used a
>   couple of years ago and there's no telling how old
> the
>   disks are or how they were stored by the, at least
> 2
>   previous owners.  I can't stand not having my
> keyboard
>   operating.  I do all my drums on it as a group of
>   sequences as well as piano and organ.
>   Jay 
> 
> 
>   > Jay,
>   > 
>   > Hans has forwarded you information for your
>   > sequencer operation. Hopefully that will help
> you
>   > out.
>   > 
>   > In addition to his help, my SD-1 sequencer
> operating
>   > system is Version 4.10 and requires ROM
> operating
>   > system 4.0 or higher. If worse comes to worse, I
>   > would be happy to mail you a copy of my O. S.
> disk.
>   > Let me know and I will email you at your
> personal
>   > email address and get your address.
>   > 
>   > Alan
>   >   ----- Original Message ----- 
>   >   From: Jay Barnes 
>   >   To: Ensoniq-VFX-SD@yahoogroups.com 
>   >   Sent: Sunday, January 02, 2005 9:49 AM
>   >   Subject: [Ensoniq-VFX-SD] SD-1 sequencer
> software
>   > 
>   > 
>   > 
>   >   Reg Took your advise.  Here's the new post.
>   > 
>   >   My sequencer went down on my SD-1 32 voice. 
> The
>   > read out 
>   >   says "Sequencer Must Be Loaded."  
>   > 
>   >   It takes floppies to load programs.  Of course
> the
>   > only floppy I 
>   >   don't have is the sequencer sofware.  
>   > 
>   >   Anyone have any idea if there is a download
>   > somewhere to 
>   >   reload the sequencer?  
>   > 
>   >   I really hate that I lost my sequences that I
>   > worked so hard on.
>   >   (Back up  Back up  Back up!)
>   > 
>   >   Thanks.
>   > 
>   >   Jay
>   > 
>   > 
>   > 
>   > 
>   > 
>   > 
>   >
>  
>
------------------------------------------------------------------------------
>   >   Yahoo! Groups Links
>   > 
>   >     a.. To visit your group on the web, go to:
>   >    
> http://groups.yahoo.com/group/Ensoniq-VFX-SD/
>   >       
>   >     b.. To unsubscribe from this group, send an
>   > email to:
>   >     Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
>   >       
>   >     c.. Your use of Yahoo! Groups is subject to
> the
>   > Yahoo! Terms of Service. 
>   > 
>   > 
> 
> 
> 
>               
>   __________________________________ 
>   Do you Yahoo!? 
>   Meet the all-new My Yahoo! - Try it today! 
>   http://my.yahoo.com 
> 
> 
> 
> 
>
------------------------------------------------------------------------------
>   Yahoo! Groups Links
> 
>     a.. To visit your group on the web, go to:
>     http://groups.yahoo.com/group/Ensoniq-VFX-SD/
>       
>     b.. To unsubscribe from this group, send an
> email to:
>     Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
>       
>     c.. Your use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service. 
> 
> 



		
__________________________________ 
Do you Yahoo!? 
All your favorites on one personal page \ufffd Try My Yahoo!
http://my.yahoo.com

when my SD-1's floppy disk drive packed it in, all I
got was the "Sequencer must be loaded" message, even
though the floppy drive still loaded patches. I
suspect a replacemnet disk drive will fix your
problem. Cheers, Keith

--- Jay Barnes <apdced34@...> wrote:

>.  I can see right now that I'm not
> going
> to have my beloved keyboard up and running in the
> next
> couple days.  At least the other funtion's working
> and
> I can still at least play it even if I can't do my
> sequences.  Thanks.
>


		
__________________________________ 
Do you Yahoo!? 
Send holiday email and support a worthy cause. Do good. 
http://celebrity.mail.yahoo.com

Bummer.  I hope it's not that.  The disks are cheaper.
 hahaha
I'm hoping for the best but I'll keep this in mind
also.  Thanks.
Jay

> when my SD-1's floppy disk drive packed it in, all I
> got was the "Sequencer must be loaded" message, even
> though the floppy drive still loaded patches. I
> suspect a replacemnet disk drive will fix your
> problem. Cheers, Keith
> 
> --- Jay Barnes <apdced34@...> wrote:
> 
> >.  I can see right now that I'm not
> > going
> > to have my beloved keyboard up and running in the
> > next
> > couple days.  At least the other funtion's working
> > and
> > I can still at least play it even if I can't do my
> > sequences.  Thanks.
> >
> 
> 
> 		
> __________________________________ 
> Do you Yahoo!? 
> Send holiday email and support a worthy cause. Do
> good. 
> http://celebrity.mail.yahoo.com
> 



		
__________________________________ 
Do you Yahoo!? 
Dress up your holiday email, Hollywood style. Learn more. 
http://celebrity.mail.yahoo.com

I think I can come up with a DD floppy or two.  I'll
study the issue and see what happens and if things
confuse me beyond reason I'll ask some, hopefully,
intelligent questions.
Thanks guys.
Jay


> Alan's right. You should use a DD (double density)
> floppy. And you MUST use ede109.exe to store the OS
> 4.10. There is NO WAY just to copy the downloaded
> file to a floppy! 
> 
> The floppy's not necessarily the issue. You could
> try to cheat with a 1,4M (HD) floppy with the hole
> on the bottom left corner covered (the right hole is
> the write protection). It's not a safe way to store
> VFX data and althogh you can be lucky it's better to
> get hold of DD floppies
> 
> It's more important to use EDE in a proper DOS
> environment as explained in the message I already
> referred to. The reason is that Ensoniq used a non
> standard floppy format with 80 tracks and Windows is
> not able to handle this! The bad thing is: EDE would
> not complain in most cases but your VFX will just
> keep staring back at you...
> I guess this is why so many VFX friends 
> 
> Unfortunately there is no program for the Mac. EMU
> let you choose Mac as a platform only to offer you
> the same DOS program - bloody morons.
> 
> If you don't feel comfortable with this low level PC
> stuff let me know. There are more ways to solve the
> problem.
> 
> Hans
> 
>   ----- Original Message ----- 
>   From: Alan Ginocchio 
>   To: Ensoniq-VFX-SD@yahoogroups.com 
>   Sent: Sunday, January 02, 2005 7:52 PM
>   Subject: Re: [Ensoniq-VFX-SD] SD-1 sequencer
> software
> 
> 
>   Hans will be able to explain the situation with
> downloading those files from "emu.com" far, far
> better than I can. I have never used those files
> provided by that website so I am not an expert but I
> think you must first install the Giebler EDE
> software Hans referred to which actually converts
> the downloaded 4.10 operating system you are
> referring to into something the SD1 can read. Also,
> if you are not aware, the SD1 disk drive reads only
> "Double-Density" floppies and will not read the
> standard type floppy you use in your desktop
> computer. So if you have downloaded the Version 4.10
> file from the site referred to by Hans and then
> tried to use that disk in the SD1 - the SD1 will
> indeed just sit there staring back at you.
> 
>   But again, I am aware of the procedure Hans has
> mentioned and referred you to but know little or
> nothing about the specifics since I have personally
> never used it. Sorry.......
> 
>   Alan
>     ----- Original Message ----- 
>     From: Jay Barnes 
>     To: Ensoniq-VFX-SD@yahoogroups.com 
>     Sent: Sunday, January 02, 2005 12:15 PM
>     Subject: Re: [Ensoniq-VFX-SD] SD-1 sequencer
> software
> 
> 
>     Alan,
>     I appreciate that.  In looking at that site I'm
> not
>     seeing anything sequencer specific.  Should I
> assume
>     that the sequencer program is contained in the
> 4.10
>     disc?  If that's the case it would appear that
> the
>     disc I have isn't any good.  Floppies do tend to
> go
>     bad.  When I load the 4.10 disk and do the load
>     command it does nothing.  I bought my SD1 used a
>     couple of years ago and there's no telling how
> old the
>     disks are or how they were stored by the, at
> least 2
>     previous owners.  I can't stand not having my
> keyboard
>     operating.  I do all my drums on it as a group
> of
>     sequences as well as piano and organ.
>     Jay 
> 
> 
>     > Jay,
>     > 
>     > Hans has forwarded you information for your
>     > sequencer operation. Hopefully that will help
> you
>     > out.
>     > 
>     > In addition to his help, my SD-1 sequencer
> operating
>     > system is Version 4.10 and requires ROM
> operating
>     > system 4.0 or higher. If worse comes to worse,
> I
>     > would be happy to mail you a copy of my O. S.
> disk.
>     > Let me know and I will email you at your
> personal
>     > email address and get your address.
>     > 
>     > Alan
>     >   ----- Original Message ----- 
>     >   From: Jay Barnes 
>     >   To: Ensoniq-VFX-SD@yahoogroups.com 
>     >   Sent: Sunday, January 02, 2005 9:49 AM
>     >   Subject: [Ensoniq-VFX-SD] SD-1 sequencer
> software
>     > 
>     > 
>     > 
>     >   Reg Took your advise.  Here's the new post.
>     > 
>     >   My sequencer went down on my SD-1 32 voice. 
> The
>     > read out 
>     >   says "Sequencer Must Be Loaded."  
>     > 
>     >   It takes floppies to load programs.  Of
> course the
>     > only floppy I 
>     >   don't have is the sequencer sofware.  
>     > 
>     >   Anyone have any idea if there is a download
>     > somewhere to 
>     >   reload the sequencer?  
>     > 
>     >   I really hate that I lost my sequences that
> I
>     > worked so hard on.
>     >   (Back up  Back up  Back up!)
>     > 
>     >   Thanks.
>     > 
>     >   Jay
>     > 
>     > 
>     > 
>     > 
>     > 
>     > 
>     >
>    
>
------------------------------------------------------------------------------
>     >   Yahoo! Groups Links
>     > 
>     >     a.. To visit your group on the web, go to:
>     >    
> http://groups.yahoo.com/group/Ensoniq-VFX-SD/
>     >       
>     >     b.. To unsubscribe from this group, send
> an
>     > email to:
>     >     Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
>     >       
>     >     c.. Your use of Yahoo! Groups is subject
> to the
>     > Yahoo! Terms of Service. 
>     > 
>     > 
> 
> 
> 
>                 
>     __________________________________ 
>     Do you Yahoo!? 
>     Meet the all-new My Yahoo! - Try it today! 
>     http://my.yahoo.com 
> 
> 
> 
> 
>
----------------------------------------------------------------------------
>     Yahoo! Groups Links
> 
>       a.. To visit your group on the web, go to:
>       http://groups.yahoo.com/group/Ensoniq-VFX-SD/
>         
>       b.. To unsubscribe from this group, send an
> email to:
>       Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
>         
>       c.. Your use of Yahoo! Groups is subject to
> the Yahoo! Terms of Service. 
> 
> 



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - now with 250MB free storage. Learn more.
http://info.mail.yahoo.com/mail_250