Yahoo Groups archive
Thread
2011-09-19 by Bill Tomlinson
Hi. Wondering if anybody has had success with some kind of internal cooling fan on the Ensoniq line (this case, an SD-1 32-voice)? My plan - right now only on paper - is to mount an 80mm fan in the bottom of the case under the dick drive, then move the existing heat sink INWARD about 1/2 inch to allow air to be drawn over it and out the fan. Will post here if it works. Bill
2011-09-20 by Jon Carroll
The heat problem is largely in the power supply on the VFX/SD series. ----- Original Message -----
From: "Bill Tomlinson" <tomlinson6050@...> To: <Ensoniq-VFX-SD@yahoogroups.com> Sent: Monday, September 19, 2011 12:45 PM Subject: [Ensoniq-VFX-SD] cooling > Hi. Wondering if anybody has had success with some kind of internal > cooling fan on the Ensoniq line (this case, an SD-1 32-voice)? > > My plan - right now only on paper - is to mount an 80mm fan in the bottom > of the case under the dick drive, then move the existing heat sink INWARD > about 1/2 inch to allow air to be drawn over it and out the fan. > > Will post here if it works. > > Bill > > > > ------------------------------------ > > Yahoo! Groups Links > > >