Patches and discussion for Ensoniq VFX family

It will still play on some of the keys, but it sounds out of tune. 
Almost like its playing more than one note. It sound like a mimor 
cord. It is something loose or cracked, not programing.  The last 
time I had to have it fixed no one could with out the scamatic (my 
spelling sucks). I called ensoniq they would not release one . I 
finally got a hold of one of the big bosses & he ok'ed to ship it to 
them to fix. I know it can be fixed but i don't know by who or how 
long.    thanks to everyone for help.   vandalism

Hmmm... sounds like it's having problems with decoding the keyboard -
getting faulty information from the key matrix.  It may be as simple as a
problem reading the keyboard that is not bad enough to cause a "Keyboard
Calibration Error" on power up.  Try this to see if it effects a change in
behavior:  Place the instrument on a flat surface, like a sturdy table.
With the power off, lay your left arm across the left end of the keyboard to
clamp it in place.  Then, lift the right rear of the instrument about 1/2"
with your right hand.  You should hear a rather alarming crackly sound
coming from the keyboard.  Power up the keyboard, and see if there is a
change in its behavior.  Then, power off, switch arms and hands, and lift
the left back corner and try it again.  If this makes any changes, then
you're either having a problem with the connection 1) between the keyboard
halves that is intermittent, or (2) there's a cracked circuit track in or
around the keyboard matrix.

For repair, you may want to try Bill's Music House in Catonsville, MD.  The
number is either 410-747-1900 or 410-744-1900 (I can't remember which
exchange).  Don't worry if you dial the wrong one first.  The folks there
are used to getting calls for Bill's by mistake.  Anyway, the tech who is
there has been there forever, and has done a ton of VFX repairs over the
years.  However, I'd talk to Don Haskins (keyboard sales manager and
all-around good guy) first, and tell him that I told you to call.  He'll
know if they can fix it there, or if not, where to go to get it fixed.  He
is, like us, an Ensoniq nut.

I also know another guy who used to be in the repair business who can fix
anything under the sun.  He's also here in MD, and might be willing to do me
a favor... if it gets down to that.

Geren W. Mortensen, Jr.
Columbia, Maryland, USA

---------------------------------------------------------------------------
My Personal Web Site                               http://gerenm.tripod.com
The On30Guy On30 Web Site                         http://on30guy.tripod.com
Geren's Photography Site                       http://gerenphoto.tripod.com
Geren's Boating Site                            http://gerenboat.tripod.com
UgotaWanit: A New Music Experience                http://www.ugotawanit.com
Four County Society of Model Engineers                 http://www.fcsme.org
---------------------------------------------------------------------------

> -----Original Message-----
> From: moelarry2001 [mailto:vclarkjr@...]
> Sent: Sunday, April 21, 2002 10:15 PM
> To: Ensoniq-VFX-SD@yahoogroups.com
> Subject: [Ensoniq-VFX-SD] want to buy a vfxsd
>
>
> It will still play on some of the keys, but it sounds out of tune.
> Almost like its playing more than one note. It sound like a mimor
> cord. It is something loose or cracked, not programing.  The last
> time I had to have it fixed no one could with out the scamatic (my
> spelling sucks). I called ensoniq they would not release one . I
> finally got a hold of one of the big bosses & he ok'ed to ship it to
> them to fix. I know it can be fixed but i don't know by who or how
> long.    thanks to everyone for help.   vandalism
>
>
>
> To unsubscribe from this group, send an email to:
> Ensoniq-VFX-SD-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Dan please email me again about the vfxsd. My email doesn't seen to 
want to reach you. P;ease leave a phone # so we can talk. thanks, 
Vandalism.

Dan please email me again about the vfxsd. My email doesn't seen to 
want to reach you. P;ease leave a phone # so we can talk. thanks, 
Vandalism.