Patches and discussion for Ensoniq VFX family

On 3/22/12 5:57 PM, samuel brannon wrote:

I have an SD-1 32 that says that the OS is not compatible when I try to reload the sequencer. I've re-initialized it by holding the preset button and then the upper left soft button. The rest of the info on the floppy loads, so, the disc is okay. I have two disc and both give the error message. Help. Craig

are you sure the sequencer OS version is compatible with the ROM firmware version of the keyboard ?

--- In Ensoniq-VFX-SD@yahoogroups.com, samuel brannon <samuelcraig@...> wrote:
>
> I have an SD-1 32 that says that the OS is not compatible when I try to reload the sequencer. I've re-initialized it by holding the preset button and then the upper left soft button. The rest of the info on the floppy loads, so, the disc is okay. I have two disc and both give the error message. Help. Craig
>

Have you solved the problem yet?

This may sound stupid but did you try re-initializing it by actually turning it off for about 15 seconds? (I'm grasping at straws here.) I have to re-initialize one of mine in that manner once in a while because the "soft re-initialize" does not work. I don't actually have to wait 15 seconds but thought it may help in your case. 

Please keep us updated.