Homebrew PCBs

You are reffering to a completely different type of equipment!

There are a clampingbar at the shear that ST showed.... 


  ----- Original Message ----- 
  From: Phil 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Thursday, September 22, 2005 5:17 AM
  Subject: [Homebrew_PCBs] Re: cutting PCBs


  --- In Homebrew_PCBs@yahoogroups.com, "turbojet" <turbojet@k...> wrote:
  > If You look really good, You´ll se the "clampingbar"´it´s located
  behind the lever...

  we must be looking at different pictures or have different ideas what
  that is.  the only thing behind the lever is the arm that holds the
  lever.  That doesn't provide any clamp that I can see.

  Look at this for what a clamping bar is:
  http://images.grizzly.com/grizzlycom/pics/jpeg288/G/G6089.jpg
  note the horizontal bar in front of the blade.  It is spring loaded
  and moves with the blade. It contacts the sheet being sheared before
  the blade does. The spring tension holds the sheet in place as the
  blade makes it cut.  It makes for a very high quality and precise cut.




  Be sure to visit the group home and check for new Links, Files, and Photos:
  http://groups.yahoo.com/group/Homebrew_PCBs

  If Files or Photos are running short of space, post them here:
  http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 



------------------------------------------------------------------------------
  YAHOO! GROUPS LINKS 

    a..  Visit your group "Homebrew_PCBs" on the web.
      
    b..  To unsubscribe from this group, send an email to:
     Homebrew_PCBs-unsubscribe@yahoogroups.com
      
    c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]