Homebrew PCBs

On 31 Dec 2005, at 17:19, kennytrussell wrote:

> I agree with all of Stefan's comments completely. I will add to my
> comments that the ironing-on process is the most difficult to get
> consistent. Particularly, I have had trouble around the edges.

I am finding the iron toner process so easy and predictable I am  
wondering why some of you find it a problem. I am using Epson photo  
quality paper, S041061 and after a 2 minute soak it comes off  
completely, leaving no residue or paper. I found it better than the  
cheap glossy I tried. I just did my first double sided board which  
was also OK.

I move the iron around making sure I get the edges done. I don't use  
much downward force, just enough to keep intimate contact with the  
board.

My first board efforts, making some LED clocks, are at http:// 
www.jsdesign.co.uk/charlie/

John