All of these chemicals are irritants so you should avoid getting them in your eyes, on your skin, or inhaled. ethanol - causes skin and eye irritation. Ingestion can cause nausea, vomitting, and inebriation. Chronic use can cause sever liver damage. denatured alcohol - same as ethanal except it can kill you IAP - harmful by inhalation, ingestion, or skin absorption. May act as an irritant. acetone - may be harmful by inhalation, ingestion, or skin absorption. Irritant - liquid may cause permanent eye damage (corneal clouding). Skin contact may cause defatting (always in my case...). Also called dimethyl ketone, methyl ketone. ferric chloride - corrosive - causes burns. Harmful if swallowed and in contact with skin. Prolonged contact may lead to dermatitis. Regards, Dennis --- In Homebrew_PCBs@yahoogroups.com, "Stefan Trethan" <stefan_trethan@...> wrote: > > Isn't MEK the stuff that _will_ damage your eyes badly in case of splashes? > > ST
Message
Re: Cleaning PCB without Acetone
2006-02-07 by dl5012
Attachments
- No local attachments were found for this message.