Homebrew PCBs

Print or export to some graphic format (e.g. TIF), and copy/paste the  
files together with paint shop pro or similar software.
paint shop can be found for like $10 on ebay for the older versions, which  
are a lot faster for large tiff files anyway, so better. I use version 6,  
i believe 7 should be OK also. 8 is already slow.

ST


On Sun, 14 May 2006 17:10:26 +0200, William Kroyer  
<william.kroyer@...> wrote:

>  I'm new to using the PCB layout CAD programs but I have found that
> you can place traces, etc outside of the 3"X4" area.  You just can't  
> place
> parts outside of that space.  I tried copying and pasting a small boards
> layout next to each other and it did copy all of the traces and vias
> associated with the traces but not the vias for the parts.  It would be
> a bit
> time consuming but you could, in theory, go through and replace the
> missing vias and then use that one to copy and paste multiple boards
> side by side.