Homebrew PCBs

On Monday 14 April 2003 01:52 pm, Dell Gillispie wrote:
> Thanks: Ned, Derek, and John.  I think one solution would be to
> group the whole drawing and then copy and paste it.  Can't get the
> "Group" command to work.  Must be doing something wrong.  Any
> thoughts?

Just open the board file, as this won't back-annotate. If the 
schematic opens, close it. Now you can turn on all layers, group all, 
cut/go, paste.

-- 
Ned Konz
http://bike-nomad.com
GPG key ID: BEEA7EFE