Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, "Stefan Trethan" 
<stefan_trethan@...> wrote:
>
> On Thu, 08 Mar 2007 13:46:52 +0100, Paul Sturpe <sturpe@...>  
> wrote:
> 
> > Stefan,
> > I finally got started to dis-assemble the C84.  This gives me a
> > better look at the mechanism.  I have cleaned the parking pad, 
but I
> > don't see the vacuum hose you talk about.  Can you give me 
directions
> > of where to look for the vacuum hose?
> > Thanks,
> > Paul
> 
> 
> It sucks through the black pad right under the head, so it is 
attached at  
> the underside of that plastic part. I think there is even a way to 
lift  
> that part without removing any screws, but i'm not certain. There 
is a  
> single screw holding the whole parking station on the inside of 
the  
> printer, the outside edge is held with a spring catch.
> 
> ST
>
Do you mean under the pad that is beneath the black ink cartridge 
when the head is parked?
Pau