Homebrew PCBs

I made a tank some time ago.  I cut a hole in the side slightly larger 
than an aquarium heater, then put the heather through the hole and 
sealed it with RTV (silicone sealant).   I got a small aquarium water 
pump and submerged it in the tank in the bottom.  It worked as well as 
any I've seen.


qamar islam wrote:
> Leon <leon355@...> wrote:          ----- Original Message ----- 
> From: "Ronald Ausloos" <ronald_ausloos@...>
> To: <Homebrew_PCBs@yahoogroups.com>
> Sent: Friday, March 23, 2007 5:27 AM
> Subject: Re: [Homebrew_PCBs] Velleman PCB Etching Tank ET-20
>
>   
>> Didn't you have any problems to fix that heating element in the tank? Here 
>> in Belgium , the heater is supplied with 2 big suckers. They even don't 
>> fit in that tank! So , I had to fix the heater with some rope .... Time to 
>> etch a pcb is the same like yours.
>>     
>
> The heater hangs straight down in mine, the top assembly with the thermostat 
> control is a bit wider than the tank.
>
> The suckers must be for an aquarium. I broke one of mine pushing it onto the 
> heater, I should have slid it on from the end. I don't need them, anyway.
>
> Leon
>
>
>
>          
>
>  
> ---------------------------------
> The fish are biting.
>  Get more visitors on your site using Yahoo! Search Marketing.
>
> [Non-text portions of this message have been removed]
>
>
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 
> Yahoo! Groups Links
>
>
>
>