Homebrew PCBs

>I bet if one of those 6 mil lines were far away from surrounding 
>copper then it will get etched faster, and therefore more undercut.

Look at the outside edge of the outermost track in the link below. The 
only real issue here is the pronounced lower printer resolution on 
tracks perpendicular to printhead movement. This contributes to the 
printer limitations I've been referring to since it's just as evident 
in the artwork.

http://upload.pbase.com/eldata/image/77010930/original


--- In Homebrew_PCBs@yahoogroups.com, Adam Seychell <a_seychell@...> 
wrote:
>