Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, "docstein99" <docstein99@...> wrote:
>
I read somewhere that using a thin, flexible clad board, 
would not require to modify the printer.
wonder if using the Single Sided .014 (.036mm) Thick, 
1 oz Copper being sold at www.digikey.com , 
manufactured by Injectorall)  ( catalog page 1945 )
as follows : 

 Dimensions               Digi-Key     Price        Injectorall
 Inch (cm)                Part No.      Each         Part No.
 3 x 4.5 (7.62 x 11.43)   PC94-ND       2.33           PC94
 4 x 6 (10.16 x 15.24)    PC95-ND       4.35           PC95
 6 x 6 (15.24 x 15.24)    PC95-S-ND     5.18           PC95-S
 6 x 9 (15.24 x 22.86)    PC96-ND       7.78           PC96
 12 x 18 (30.48 x 45.72)  PC97-ND      23.37           PC97

would require the printer mechanical modification.
I understand most printers have a way to print 
thick envelopes, which should be ok for the thickness
 of the boards above [.014 (.036mm)]  I THINK . 
juan