Homebrew PCBs

Hi Brian,

Thanks for the reply.

My experience is that I get inconsistent transfers with hot peal. Some of the toner stays back on the paper. I also have a high temp polyester film that does not leave toner but it is a smooth surface and the toner tends to run and short traces.

I need to look into different papers. Which paper do you use, please??

Ed
w4eds@...

===============================================================

--- On Tue, 10/14/08, John Coppens <john@...> wrote:
From: John Coppens <john@...>
Subject: Re: [Homebrew_PCBs] Re: Toner Transfer
To: Homebrew_PCBs@yahoogroups.com
Date: Tuesday, October 14, 2008, 12:14 PM










    
            On Mon, 13 Oct 2008 22:00:40 -0000

"Brian" <blue_eagle74@ yahoo.com> wrote:



> I remove my paper while it is still hot. I haven't had anything stick 

> and it etches well. I measured my traces as 10 mil.



Hi Brian.



I hadn't read that suggestion elsewhere. When you remove the paper

'freshly' ironed, doesn't half of the toner stick to the paper?



John


      

    
    
	
	 
	
	








	


	
	


      

[Non-text portions of this message have been removed]