Homebrew PCBs

"pgdion1" <pgdion1@...> writes:
> every thing is either #75 or #59,

I find I use the #80 (13 mil) the most, because most of the holes I
need are vias!  I cut up some 22 gauge stranded speaker wire and
de-strand it; the individual conductors are fine enough to fit through
a 13 mil hole just fine, and it's probably the cheapest wire I can
get.

Second most is the 26 mil bit, for the friction-fit pins I use to make
adapter boards.  After that is whatever I need for whatever parts I'm
using.