Homebrew PCBs

> 1)Get a PCB pre manufactured with a positive or a negative surface.
> 2)Pre Cut the Bord in nearly the finish board size
> 3)Pill of the PCB`s protecting cower.
> 4)Putt the board in the printer and print.
> 5)Expose the board to UV-light.
> 6)Putt the board in a developer for the pos or neg coating.
> 7)Putt the board in the etcher owe your own chose and etch the board.
> 
> END.

If you have positive or negative board you would not want to print
directly to the board with a printer.  If at least if I understood
what you are saying correctly.  You would need to print to a film
positive or negative then expose resist on the board to UV then
develop the board.

Ben