Homebrew PCBs

----- Original Message ----- 
From: "D S" <eclipserd@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Friday, October 09, 2009 7:00 PM
Subject: [Homebrew_PCBs] Double sided boards and feed throughs


> Greetings to all,
>
> I'm new to the board but eager to learn.
>
> I'm embarking on a rather ambitious project that will probably see me 
> making around 65-70 PCB's when all is said and done.  Most will be simple 
> single sided boards but about 1/4 to 1/3 of them will be double sided.
>
> About half of the components are such that soldering to both sides of the 
> board isn't possible.  I've had a look through the group archives but 
> nothing really caught my eye.  Considering that cost is a large factor in 
> this project, does anyone have any good simple feed through methods.  I've 
> considered just placing pads and vias's adjacent to the holes on either 
> side and using surplus component leads to solve the issue as a last 
> resort.

I do something like that.

Leon