Homebrew PCBs

At 10:34 20/08/03 -0500, you wrote:
>    Hello everyone,
>      I am assembling a homebuilt too to make circuit boards from old
printers,
> and am looking for ideas to make a small easy table to hold them, I will be
> wanting to do double sided boards, so some way of being able to keep
> alingment when turning them over would be good,
> i only expect to be making 4x6 boards as that is the limitation of the free
> eagle cad.
> 
> Any suggestions would be very helpful

Tape the PCB on a flat piece of plastic and drill two guiding holes on them
and on the printer's bed. I hope you've solved already the PCB's transport
problem. You also have to solve the (software) problem of registering the
guiding holes with the Eagle output.
> 
> 
> Al WB0YRQ