Homebrew PCBs

Hello, Mark.

Thank you for the great documentation and the fine pictures.  I can only hope mine turn out as well.

Donald.
----- "Mark Lerman" <mlerman@...> wrote:

> The new greatly simplified controller works. It will also enable 
> experimenting with ds boards. Here is a link to a panel I just made 
> of 4 of the new mcu boards. The minor smudging at the bottom of the 
> board is an artifact - The toner was printed slightly on the tape 
> holding the board to the carrier. The traces are 10 mil wide. I will 
> post the new schematic in the next day or so.
> 
> <http://www.pbase.com/mark10970/image/124762699/original>
> 
> Mark 
>